https://support.tq-group.com/ 2026-11-06T17:20:26+00:00 https://support.tq-group.com/ https://support.tq-group.com/_media/logo.png text/html 2026-10-27T12:41:14+00:00 haenigk (haenigk@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma64xxl/linux/yocto/how-to/usb?rev=1793104874&do=diff TQMa64xxL - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- With lsusb you can see all connected usb devices. To mount a partition of a usb stick you can execute mount /dev/<partition> <mount dir> (e.g. mount /dev/sdb1 /mnt). This will mount the first partition of sdb to /mnt. text/html 2026-10-27T12:32:08+00:00 haenigk (haenigk@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma64xxl/linux/yocto/how-to/sensors?rev=1793104328&do=diff TQMa64xxL - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- To read from the temperature sensors, the following command can be used: sensors Alternatively, read from the hwmon interface directly: cat /sys/class/hwmon/hwmon<N>/temp1_input text/html 2026-10-27T12:30:00+00:00 haenigk (haenigk@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma64xxl/linux/yocto/how-to/rtc?rev=1793104200&do=diff TQMa64xxL - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- To set the hardware clock to the current time and date use the following commands: date -s "YYYY-MM-DD hh:mm:[ss]" hwclock -w text/html 2026-10-27T12:28:00+00:00 haenigk (haenigk@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma64xxl/linux/yocto/how-to/i2c?rev=1793104080&do=diff TQMa64xxL - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- An overview of the onboard I2C devices is available here. List all available I2C busses: i2c bus Select the I2C bus device i2c dev 0 Show all devices connected to the currently selected I2C bus: text/html 2026-10-27T12:23:41+00:00 haenigk (haenigk@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma64xxl/linux/yocto/how-to/buttons?rev=1793103821&do=diff TQMa64xxL - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- The MBaX4XxL features one user button which is handled by the gpio-keys driver. Please note that most GPIOs can't be set or read from U-Boot, as they are disabled in default pinmuxing, which effects the GPIO button as well. In Linux, the button works as expected text/html 2026-10-27T12:12:44+00:00 haenigk (haenigk@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma64xxl/linux/yocto/how-to/ethernet?rev=1793103164&do=diff TQMa64xxL - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- The STKa64xxL Starter Kit provides one Gigabit Ethernet interface and two PRU Gigabit Ethernet interfaces. In U-Boot, only the Gigabit Ethernet interface is supported. text/html 2026-10-27T10:41:33+00:00 haenigk (haenigk@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma64xxl/linux/yocto/how-to/can?rev=1793097693&do=diff TQMa64xxL - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- The MBaX4XxL provides the CAN interfaces CAN0 and CAN1. DIP switch S1 is used to configure the CAN0 interface (X7). Funktion S1-1 S1-2 CAN-Bus not terminated