https://support.tq-group.com/ 2026-05-14T06:34:26+00:00 https://support.tq-group.com/ https://support.tq-group.com/_media/logo.png text/html 2026-02-12T09:24:19+00:00 Anonymous (anonymous@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma65xx/linux/yocto/how-to/can?rev=1770888259&do=diff TQMa65xx - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- The MBa65xx provides the CAN interfaces CAN0 and CAN1. DIP switches SW2 and SW3 are used to configure the CAN interfaces CAN0 and CAN1. Function SWx-1 SWx-2 CAN-Bus not terminated text/html 2026-02-12T12:21:03+00:00 Anonymous (anonymous@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma65xx/linux/yocto/how-to/ethernet?rev=1770898863&do=diff TQMa65xx - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- The STKa65xx Starter Kit provides seven Gigabit Ethernet interfaces. The IP configuration can be done statically or by a DHCP server in the network. IP configuration via DHCP text/html 2026-02-12T08:50:36+00:00 Anonymous (anonymous@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma65xx/linux/yocto/how-to/rtc?rev=1770886236&do=diff TQMa65xx - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- To set the hardware clock to the current time and date use the following commands: date -s [YYYY.]MM.DD-hh:mm[:ss] hwclock -w text/html 2026-02-12T08:28:18+00:00 Anonymous (anonymous@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma65xx/linux/yocto/how-to/sidebar?rev=1770884898&do=diff Starterkit Interfaces * User LEDs * USB * RTC * Ethernet * CAN text/html 2026-02-12T08:46:04+00:00 Anonymous (anonymous@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma65xx/linux/yocto/how-to/usb?rev=1770885964&do=diff TQMa65xx - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- With lsusb you can see all connected usb devices. To mount a partition of a usb flash drive you can execute mount /dev/<partition> <mount dir> (e.g. mount /dev/sdb1 /mnt) text/html 2026-02-12T09:32:28+00:00 Anonymous (anonymous@undisclosed.example.com) https://support.tq-group.com/en/arm/tqma65xx/linux/yocto/how-to/user-led?rev=1770888748&do=diff TQMa65xx - YOCTO Linux BSP documentation * Overview * Quickstart BSP * Deployment * How-To * Known Issues ---------- The MBa65xx has two user controllable LEDs, the behavior of these LEDs can be selected by several triggers. The user LED's are located in /sys/devices/platform/gpio-leds/leds/.