https://support.tq-group.com/ 2026-05-28T12:06:37+00:00 https://support.tq-group.com/ https://support.tq-group.com/_media/logo.png text/html 2025-01-28T11:17:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://support.tq-group.com/en/layerscape/tqmls1012al/mbls1012al/data?rev=1738063030&do=diff Entry Page Third-Party Add-Ons * ITTIA DB SQL * SystemCORP IEC 61850 * NetModule IEC 62439 Board Support Packages YOCTO Linux BSP Documentation Product URL list TQ product page MBLS1012AL Starterkit * MBLS1012AL DIP switch settings Hardware Onboard I2C devices I2C bus TQMLS1012AL I2C1 0x8 PMIC 0x19 Temperature Sensor 0x31 EEPROM 0x50 EEPROM text/html 2025-01-28T11:17:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://support.tq-group.com/en/layerscape/tqmls1012al/mbls1012al/dip_switches?rev=1738063030&do=diff MBLS1012AL Configuration DIP (S1) DIP ON OFF 1 Hard-coded RCW enabled Hard-coded RCW disabled 2 Short RESET_REQ# and RESET# Isolate RESET_REQ# from RESET# 3 Debug-UART on USB / pin header Debug-UART on OpenSDA 4 text/html 2026-03-09T10:54:13+00:00 Anonymous (anonymous@undisclosed.example.com) https://support.tq-group.com/en/layerscape/tqmls1012al/mbls1012al/stk_quicksteps?rev=1773053653&do=diff Starterkit Quicksteps The Starterkit STKLS1012AL consisting of the TQMLS1012AL module and MBLS1012AL mainboard is intended as evaluation platform for the TQMLS1012AL. To bring up the board a comprehensive set of accessories is supplied with the kit. The STKLS1012AL is delivered preconfigured to boot the latest released Linux BSP revision at the time of delivery, so only the Host Computer has to be set up properly to bring the STKLS1012AL up. This page guides through the first steps with the STK…