WORK IN PROGRESS {{template>en:templates:tabs_yocto_bootstrap|product_type="Embedded module"|lang="en"|mod_name="tqma57xx"|mod_name_head="TQMa57xx"|mod_arch="arm"|bsp_name="linux"|build_system="yocto"|build_system_head="YOCTO"|bsp_name_head="Linux"}} \\ \\ ===== MBa57x ====== ==== RS485 ==== ^ RS485 bus block in half-duplex mode ^^ ^ Affects | RS485 via UARTx on MBa57xx Revsion 01xx | ^ Issue | During AM57xx reset the UARTx.CTS# pin is low by default (CPU internal pull down) | ^ Effect | Using the AM57xx RS485 circuitry in a half-duplex slave device or half-duplex multi-master environment may block the RS485 bus during AM57xx reset.\\ The bus is released as soon as the UARTx.CTS# pin is properly configured by software (e.g. U-Boot, Linux, etc.) | ^ Solution / Workaround | Add a 10k pull up to the UARTx.CTS# signal on carrier board \\ This behaviour will be fixed with MBa57xx REV.02xx |