The MBax4Xx baseboard is equipped with a Silex WLAN and Bluetooth 5.0 module.
To start and control the module you have to execute the following command in the Linux shell:
bluetoothctl
After executing the command, you are in the subsystem of the BT interface and can use it to connect devices and configure settings.
Power on the Bluetooth module on the starterkit:
power on
To allow other devices to find your chip enter the following command:
discoverable on
Scan for devices:
scan on
Connect to paired device:
connect <Device Address>
You can obtain a list of commands with the following command:
help
To leave the subsystem the following command can be used
exit
The MBax4Xx baseboard is equipped with a Panasonic ENWF9408A1EF 2.4/5GHz module.
Boot from eMMC and select the WLAN device tree by pressing 2 when prompted (U-Boot and RootFS must be present on eMMC)
Scan for Wifi networks in your area:
iw dev wlan0 scan
List available commands for wifi:
iw help