Building the Yocto SDK for the STKa8MPxL requires a Yocto build environment configured for meta-tq or ci-meta-tq. Follow the TQMa8MPxL Yocto quickstart quide instuctions to setup the build environment.
To generate the Yocto SDK for the default image tq-image-weston-debug use the following command in your build space:
bitbake -c populate_sdk tq-image-weston-debug
Yocto generates an SDK install script which is available after building in the following path of you build directory …/tmp/deploy/sdk/.
Navigate to the script and execute it to install the SDK. The code block below shows the install script name if the default image tq-image-weston-debug has been used to generate the SDK
./tq-dumpling-wayland-nxp-glibc-i686-tq-image-weston-debug-cortexa53-crypto-toolchain-4.0.5.sh
If the SDK is used in a new shell session, source the SDK environment setup script e.g. when SDK has been installed to the default path /opt/dumpling-wayland-nxp/4.0.5/
source /opt/dumpling-wayland-nxp/4.0.5/environment-setup-cortexa53-crypto-tq-linux
to build the SDK with Qt5 support execute the following command.
bitbake meta-toolchain-qt5
After building meta-toolchain-qt5 the SDK file is located in the following path of the build directory tmp/deploy/sdk/fsl-imx-wayland-glibc-x86_64-meta-toolchain-qt5-aarch64-toolchain-5.4-zeus.sh
Execute the *sh file to install the SDK, the default path is set to /opt/fsl-imx-wayland/5.4-zeus