Table of Contents
TQMa93xxLA - YOCTO Linux BSP documentation
Starterkit Interfaces and Functions
CAN
The MBa93xxLA provides the CAN interfaces CAN0 and CAN1.
CAN configuration
DIP switches S4 and S5 are used to configure the CAN interfaces CAN0 and CAN1.
| Function | S4 | S5 |
|---|---|---|
| CAN-Bus not terminated | OFF | OFF |
| not defined (illegal state) | OFF | ON |
| not defined (illegal state) | ON | OFF |
| CAN-Bus terminated with 120 Ohm | ON | ON |
CAN Loopback
Loopback Test CAN Interface
CAN0 -> CAN1
candump can0& cansend can1 5A1#11.2233.44556677.88
CAN1 -> CAN0
candump can1& cansend can0 5A1#11.2233.44556677.88
The information provided on this wiki page is subject to change due to circumstances beyond our control. While we strive to keep all details as accurate and up-to-date as possible, it is possible that certain updates or changes may go unnoticed for some time. As a result, some sections of this page may contain outdated information. If you notice any mistakes in the documentation, we kindly ask you to inform the TQ Support through our ticket system.