The meta-tq layer extends the Yocto Project's reference system Poky to provide support for a selection of TQ Embedded CPU Modules, including the MOD_NAME.
It uses the same codebase as the PTXdist based TQ Linux BSPs and therefore provides the same versions of U-Boot and Linux kernel, but doesn't define a specific root filesystem configuration.
The instructions on this page refer to the BSP and ancillary tools listed in the following table:
BSP Revision | YOCTO_REL_BRANCH_REV |
---|---|
meta-tq release | <label yocto_rel_branch>YOCTO_REL_BRANCH</label>.<label mod_name_mtq>MOD_NAME_MTQ</label>.BSP.SW.<label bsp_rev>BSP_REV</label> |
Yocto Project / Poky Release | <label yocto_rel_ver_major>YOCTO_REL_VER_MAJOR</label>.<label yocto_rel_ver_minor>YOCTO_REL_VER_MINOR</label> - <label yocto_rel_name>YOCTO_REL_NAME</label> |
Target machine1) | MTQ_MACHINES |
U-Boot | UBOOT_VERSION |
Linux Kernel | LINUX_KERNEL |
Yocto Project / Poky requires a Linux build host, so first of all you need a development workstation (or a virtual machine2)) with a Linux distribution installed.
Please refer to section Compatible Linux Distribution of the Yocto Project Quick Start for supported linux distributions and section Build Host Packages for required build host packages for those distributions.
Although not required by Yocto Project / Poky, we also recommend to configure and run a tftp server (for image download / update) and an nfs server (for network mounted root filesystem) on your development host.
1. Open a new terminal and create a directory for the BSP build e.g. in the home directory and navigate to that directory.
mkdir -p ~/workspace/<label yocto_rel_branch>YOCTO_REL_BRANCH</label>.<label yocto_rel_branch_module>YOCTO_REL_BRANCH_MODULE</label>.BSP.SW.<label yocto_rel_branch_rev>YOCTO_REL_BRANCH_REV</label> cd ~/workspace/<label yocto_rel_branch>YOCTO_REL_BRANCH</label>.<label yocto_rel_branch_module>YOCTO_REL_BRANCH_MODULE</label>.BSP.SW.<label yocto_rel_branch_rev>YOCTO_REL_BRANCH_REV</label>
2. Create a local copy of MTQ_REPOS
$ git clone --recurse-submodules https://github.com/tq-systems/ci-meta-tq.git
3. Checkout BSP release on new local branch.
$ cd ci-meta-tq $ git checkout <label yocto_rel_branch>YOCTO_REL_BRANCH</label>.<label yocto_rel_branch_module>YOCTO_REL_BRANCH_MODULE</label>.BSP.SW.<label yocto_rel_branch_rev>YOCTO_REL_BRANCH_REV</label> -b <label yocto_local_branch_name>YOCTO_LOCAL_BRANCH_NAME</label>
4. Update git submodules:
$ git submodule sync $ git submodule update --init
5. Setup local branch to track the remote branch.
git branch -u origin/<label yocto_remote_branch_name>YOCTO_REMOTE_BRANCH_NAME</label>
6. Export the environment DISTRO and MACHINE3) variable:
$ export DISTRO=<label distro_env>DISTRO_ENV</label> $ export MACHINE=<label machine_env>MACHINE_ENV</label>
7. Configure the Build:
$ source setup-environment <label mod_name_code>MOD_NAME_CODE</label>_build <label ci_mtq_build_cfg>CI_MTQ_CFG</label>
source setup-environment <label mod_name_code>MOD_NAME_CODE</label>_build
8. Build an Image for STK_NAME:
$ bitbake <label mtq_image>MTQ_IMAGE</label>-debug
$ bitbake <label mtq_image>MTQ_IMAGE</label>
$ sudo dd if=tmp/deploy/images/<label mtq_machine_default>MTQ_MACHINE_DEFAULT</label>/<label mtq_image>MTQ_IMAGE</label>-<label mtq_machine_default>MTQ_MACHINE_DEFAULT</label>.wic of=/dev/<TARGET_DEVICE>
10. Boot the STK_NAME from SD card (cf. <label mb_name>MB_NAME</label> DIP switch settings) |
1. Create a local copy of MTQ_REPOS
$ git clone --recurse-submodules https://github.com/tq-systems/ci-meta-tq.git
2. Checkout BSP release on new local branch.
$ cd ci-meta-tq $ git checkout <label yocto_zeus_rel_branch>YOCTO_ZEUS_REL_BRANCH</label>.<label yocto_zeus_rel_branch_module>YOCTO_ZEUS_REL_BRANCH_MODULE</label>.BSP.SW.<label yocto_zeus_rel_branch_rev>YOCTO_ZEUS_REL_BRANCH_REV</label> -b <label yocto_zeus_local_branch_name>YOCTO_ZEUS_LOCAL_BRANCH_NAME</label>
3. Update git submodules:
$ git submodule update --init $ git submodule sync
4. Setup local branch to track the remote branch.
git branch -u origin/<label yocto_zeus_remote_branch_name>YOCTO_ZEUS_REMOTE_BRANCH_NAME</label>
5. Configure the Build8):
$ source imx-setup-release.sh -b <label mod_name_code>MOD_NAME_CODE</label>_build -e wayland $ echo 'MACHINE = "<label mtq_machine_default_zeus>MTQ_MACHINE_DEFAULT_ZEUS</label>"' >> conf/local.conf
source setup-environment tqma8mpxl_build
6. Build an Image for STK_NAME:
$ bitbake <label mtq_image>MTQ_IMAGE</label>
tmp/deploy/images/MTQ_MACHINE_DEFAULT_ZEUS9)/MTQ_IMAGE_ZEUS-MTQ_MACHINE_DEFAULT_ZEUS10).wic
$ sudo dd if=tmp/deploy/images/<label mtq_machine_default_zeus>MTQ_MACHINE_DEFAULT_ZEUS</label>/<label mtq_image_zeus>MTQ_IMAGE_ZEUS</label>-<label mtq_machine_default_zeus>MTQ_MACHINE_DEFAULT_ZEUS</label>.wic of=/dev/<TARGET_DEVICE>
8. Boot the STK_NAME from SD card (cf. <label mb_name>MB_NAME</label> DIP switch settings) |