Insyde Core Update to tag 05.43.12.0049
Fix not working fan control
Configure GPIO_R12 to CLKOUT_48
Integrate curent UEFI Lan driver 0.10.1
Change Default configuration
Numlock <ON>
Power Limit 2 Override <Disabled>
C states <Enabled>
Package C State Limit <C3>
DMI Gen3 ASPM <Disabled>
PCI Express Clock Gating <Disabled>
DMI Link ASPM Control <Disabled>
Audio DSP <Disabled>
Legacy IO Low Latency <Enabled> (improve real-time behav-ior)
HID Event Filter Driver <Disabled>
REFRESH_2X_MODE <Enabled for WARM or HOT>
CNVi Mode <Disabled>
ISH Controller <Disabled>
ACPI D3Cold Support <Disabled>
Console Serial Redirect <Disabled>
Intel(R) SpeedStep™ <Enabled>
IPU Device (B0:D5:F0) <Disabled>
HD Audio <Enabled>
Audio DSP Compliance Mode <UAA (HDA Inbox/IntelSST)>
HDA-Link Codec Select <Platform Onboard>
xDCI Support <Disabled>
PS2 Keyboard and Mouse <Disabled>
USBC connector manager selection <Disabled>
System Agent (SA) Configuration
+ ASPM (for all PCIe ports) <Disabled>
+ L1 Substates (for all PCIe ports <Disabled>
ClkReq for Clock 1 <Disabled>
ClkReq for Clock 4 <Disabled>
ClkReq for Clock 8 <Disabled>
Enable ClockReq Messaging <Disabled>
ASPM (for all PCIe ports) <Disabled>
L1 Substates (for all PCIe ports <Disabled>
I2C0 Controller <Disabled>
I2C1 Controller <Disabled>
I2C2 Controller <Disabled>
I2C3 Controller <Disabled>
I2C4 Controller <Disabled>
I2C5 Controller <Disabled>
UART0 Controller <Disabled>
PCH TSN
LAN Controller <Disabled>
Clock0 assignment <Enabled>
Clock4 assignment <Enabled>
Clock8 assignment <Enabled>
Low Power S0 Idle Capability <Disabled>
PMC Fast Boot <Enabled>
Adapt setup menu
Set Sata/PCIe Combo Port to PCI instead of automatic
Adapt Child Device List (GOP)
Remove Support for SiodummyPkg
Enable Usage of SPI Flashes not listed
reserve IRQ11 for use with (internal) PCI bus
Enable Console Redirection Support
Default value is disabled
Set maximal password length to 20 letters
use OemSvcLoadDefaultSetupMenu for 3 x reset processing
Restore setup default feature
Enable built time flag in BIOS setup menu
Use current CSME CSME_15.0.35.1898V3_B0_Consumer
add current CSME version CSME_15.0.35.1898V3_B0_Consumer
SioF8121e: Enable Super IO
SioF81214: Add package
SioNct7802y: Enable driver
SioNct7802y: Add package from TQMx80UC
Configure SerIRQ in eSPI-to-LPC bridge ECE1200
SioTqmx86: Adapt to TQMx110EB module
SioTqmx86: Add and enable driver
TQMx110EB: Correct Verb Table
Set maximal DP Link rate of DDI1 and DDI2 to HBR3
Fix not booting module when system is cold
Do not save system password in CMOS
Integrate Verb Table for Audio codec CS4207
Disable USB Ports not used
GPIO Configuration GPIO GPP_G2
Disable PCIe Ports not used
Switch to TQ version string
Adapt SMBIOS data
Integrate TQ Boot Logo
HSIO Combo Port (PCIe/SATA) should be configured automatically
Change to Textual Browser
Set PCH to HM570 in FIT
Decode LPC IO range for CPLD access
Fix not working BIOS Update
Enable Snapscreen support
Adapt GPIO configuration
Adapt Fit configuration (XML)
Adapt Display configuration for DP/HDMI usage
Disable Thunderbolt und USB Type-C Power Delivery
Define Reference BoardID
Config setup to no Intel CRB
Disable EC and remove EC region
Adapt GOP config
Add CSEBuild.bat
Add Board Package
Add gitignore