Embedded module TQMx110EB Documentation
BIOS Overview
BIOS Overview
BIOS Revision | BIOS Version | CSE Firmware Version | BIOS Binary |
---|---|---|---|
Rev. 0101 | 05.43.12.49.02 | 15.0.35.1898 | TQMx110EB_05.43.12.49.02.bin |
Changelog
Changelog
05.43.12.49.02
- Insyde Core Update to tag 05.43.12.0049
- Fix not working fan control
- Configure GPIO_R12 to CLKOUT_48
- Integrate curent UEFI Lan driver 0.10.1
- Change Default configuration
- Numlock <ON>
- Power Limit 2 Override <Disabled>
- C states <Enabled>
- Package C State Limit <C3>
- DMI Gen3 ASPM <Disabled>
- PCI Express Clock Gating <Disabled>
- DMI Link ASPM Control <Disabled>
- Audio DSP <Disabled>
- Legacy IO Low Latency <Enabled> (improve real-time behav-ior)
- HID Event Filter Driver <Disabled>
- REFRESH_2X_MODE <Enabled for WARM or HOT>
- CNVi Mode <Disabled>
- ISH Controller <Disabled>
- ACPI D3Cold Support <Disabled>
- Console Serial Redirect <Disabled>
- Intel(R) SpeedStep™ <Enabled>
- IPU Device (B0:D5:F0) <Disabled>
- HD Audio <Enabled>
- Audio DSP Compliance Mode <UAA (HDA Inbox/IntelSST)>
- HDA-Link Codec Select <Platform Onboard>
- xDCI Support <Disabled>
- PS2 Keyboard and Mouse <Disabled>
- USBC connector manager selection <Disabled>
- System Agent (SA) Configuration
- + ASPM (for all PCIe ports) <Disabled>
- + L1 Substates (for all PCIe ports <Disabled>
- ClkReq for Clock 1 <Disabled>
- ClkReq for Clock 4 <Disabled>
- ClkReq for Clock 8 <Disabled>
- Enable ClockReq Messaging <Disabled>
- ASPM (for all PCIe ports) <Disabled>
- L1 Substates (for all PCIe ports <Disabled>
- I2C0 Controller <Disabled>
- I2C1 Controller <Disabled>
- I2C2 Controller <Disabled>
- I2C3 Controller <Disabled>
- I2C4 Controller <Disabled>
- I2C5 Controller <Disabled>
- UART0 Controller <Disabled>
- PCH TSN LAN Controller <Disabled>
- Clock0 assignment <Enabled>
- Clock4 assignment <Enabled>
- Clock8 assignment <Enabled>
- Low Power S0 Idle Capability <Disabled>
- PMC Fast Boot <Enabled>
- Adapt setup menu
- Set Sata/PCIe Combo Port to PCI instead of automatic
- Adapt Child Device List (GOP)
- Remove Support for SiodummyPkg
- Enable Usage of SPI Flashes not listed
- reserve IRQ11 for use with (internal) PCI bus
- Enable Console Redirection Support
- Default value is disabled
- Set maximal password length to 20 letters
- use OemSvcLoadDefaultSetupMenu for 3 x reset processing
- Restore setup default feature
- Enable built time flag in BIOS setup menu
- Use current CSME CSME_15.0.35.1898V3_B0_Consumer
- add current CSME version CSME_15.0.35.1898V3_B0_Consumer
- SioF8121e: Enable Super IO
- SioF81214: Add package
- SioNct7802y: Enable driver
- SioNct7802y: Add package from TQMx80UC
- Configure SerIRQ in eSPI-to-LPC bridge ECE1200
- SioTqmx86: Adapt to TQMx110EB module
- SioTqmx86: Add and enable driver
- TQMx110EB: Correct Verb Table
- Set maximal DP Link rate of DDI1 and DDI2 to HBR3
- Fix not booting module when system is cold
- Do not save system password in CMOS
- Integrate Verb Table for Audio codec CS4207
- Disable USB Ports not used
- GPIO Configuration GPIO GPP_G2
- Disable PCIe Ports not used
- Switch to TQ version string
- Adapt SMBIOS data
- Integrate TQ Boot Logo
- HSIO Combo Port (PCIe/SATA) should be configured automatically
- Change to Textual Browser
- Set PCH to HM570 in FIT
- Decode LPC IO range for CPLD access
- Fix not working BIOS Update
- Enable Snapscreen support
- Adapt GPIO configuration
- Adapt Fit configuration (XML)
- Adapt Display configuration for DP/HDMI usage
- Disable Thunderbolt und USB Type-C Power Delivery
- Define Reference BoardID
- Config setup to no Intel CRB
- Disable EC and remove EC region
- Adapt GOP config
- Add CSEBuild.bat
- Add Board Package
- Add gitignore