Copy Insyde Firmware Flash Tool to USB-Stick
<USB key> ├───H2OFFT-Sx64.efi
The BIOS-Update-USB Stick is now ready for updating and flashing BIOS images.
For further Information please see the following section.
<USB key> ├─── H2OFFT-Sx64.efi ├─── TQMx60_70EB_5.12.09.53.15.bin
fs0:
. This depends on the amount of connected mass storage devices. With command ls
you can check the content of the path.H2OFFT_Sx64.efi TQMx60_70EB_5.12.09.53.15.bin –ALL –BIOS –DESC –ME –RA
⇒ BIOS will reboot into EFI shell after the update has finished succesfully
The BIOS source can be selected on the (TQMx70EB) SPI flash via connector X17/BIOS_DIS1# on MB-COME6-2.
X17/BIOS_DIS1# | |
---|---|
Open | BIOS will load from internal SPI Flash |
Close | BIOS will load from external SPI Flash |
The following SPI flash devices are supported:
Platform/Module | SPI flash device | SPI flash vendor |
---|---|---|
TQMx70EB | W25Q128JVSIQ | Winbond |
Flashing the Carrier SPI Chip is only possible with a working module.
How to:
Shell> fs0: <Enter> fs0:> H2OFFT_Sx64.efi TQMx60_70EB_5.12.09.53.15.bin –ALL –BIOS –DESC –ME –RA -N
To recover the onboard BIOS with the Carrier SPI Flash Chip, a preflashed BIOS SPI Chip is required.
Please see Flash BIOS to Carrier SPI Flash Chip above.
How To:
Shell> fs0: <Enter> fs0:\> H2OFFT_Sx64.efi TQMx60_70EB_5.12.09.53.15 –ALL –BIOS –DESC –ME –RA -N