This is an old revision of the document!
Operating System
BSP Version Matrix
BSP revision | 0100 | 0101 | 0102 | 0106 | 0109 | 0115 | 0117 | 0119 | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
PTXdist | 2012.04 | 2012.07 | 2012.07 | 2012.07 | 2013.12.0 | 2013.12.0 | 2016.04.0 | 2016.04.0 | ||||
OSELAS Toolchain | 2011.11 | 2011.11 | 2011.11 | 2011.11.3 | 2013.12.2 fsl: 2011.11.3 | 2014.12.2 | 2014.12.2 | 2014.12.2 | ||||
Platform | tqma28-fsl | tqma28-fsl | tqma28 | tqma28-fsl | tqma28 | tqma28-fsl | tqma28 | tqma28-fsl | tqma28 | tqma28 | tqma28 | tqma28 |
U-Boot | 2009.08 | 2009.08 | 2012.10 | 2009.08 | 2012.10 | 2009.08 | 2013.04 | 2009.08 | 2013.04 | 2015.07 | 2015.07 | 2015.07 |
Linux Kernel | 2.6.35 | 2.6.35 | 3.5 | 2.6.35 | 3.5 | 2.6.35 | 3.10 | 2.6.35 | 3.14 | 3.14.19 | 3.14.19 | 3.14.19 |
For new projects TQ strongly recommends to use the tqma28 platform (mainline kernel).
However, if your project has requirements not yet supported by the tqma28 platform (please check »Remarks« below), the tqma28-fsl platform (freescale kernel) may be an option.
For new projects TQ strongly recommends to use the tqma28 platform (mainline kernel).
However, if your project has requirements not yet supported by the tqma28 platform (please check »Remarks« below), the tqma28-fsl platform (freescale kernel) may be an option.
Supported Features
Feature | BSP Revision | Remarks | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
TQ Product | Chip | Interface | Function | 100 | 101 | 102 | 106 | 109 | 115 | 117 | |
TQMa28 | i.MX28 | CPU | • | • | • | • | • | • | • | i.MX287, i.MX283 | |
AUART0 | RS485 | • | • | • | • | • | • | • | |||
AUART1 | • | • | • | • | • | • | • | RX/TX, TTL available on X14 | |||
AUART2 | • | • | • | • | • | • | • | not available due to pin multiplexing | |||
AUART3 | RS232 | • | • | • | • | • | • | • | Default console on TQMa28 (U-boot and Linux) RX/TX/RTS/CTS, TTL available on X14 |
||
AUART4 | • | • | • | • | • | • | • | RX/TX/RTS/CTS, TTL available on X10 | |||
CAN0 | CAN 2.0B | • | • | • | • | • | • | • | |||
CAN1 | CAN 2.0B | • | • | • | • | • | • | • | |||
DUART | RS232 | • | • | • | • | • | • | • | Default console on TQMa28L (U-boot and Linux) RX/TX, TTL available on X14 |
||
EMI | DDR2 SDRAM | • | • | • | • | • | • | • | |||
ENET-MAC0 | 10 Mbps and 100 Mbps Ethernet/IEEE 802.3 | • | • | • | • | • | • | • | BSP Rev. < 0106 BSP Rev. ≥ 0106 [for background infos cf. Technical Note TQMa28-MBa28] MBa28 Rev. ≥ 0106: Provides 50 MHz crystal oscillator as an external clock source for ethernet |
||
IEEE-1588 | |||||||||||
ENET-MAC1 | 10 Mbps and 100 Mbps Ethernet/IEEE 802.3 | • | • | • | • | • | • | • | |||
IEEE-1588 | |||||||||||
HSADC | see constraints | ||||||||||
I2C0 | Bus access | • | • | • | • | • | • | • | |||
I2C0 | Boot EEPROM (0xA0) | • | • | • | • | TQMa28 Rev. ≥ 0200 | |||||
I2C1 | Bus access | • | • | • | • | • | • | • | |||
I2C1 | LM73 (0x49) | • | • | • | • | • | • | • | |||
M24C64 (0x50) | • | • | • | • | • | • | • | intended for customer use | |||
I2C1 | PCA9554D (0x20) | • | • | • | • | • | • | • | |||
PCA9554D (0x21) | • | • | • | • | • | • | • | ||||
LM73 (0x4A) | • | • | • | • | • | • | • | ||||
SGTL5000 | • | • | • | • | • | • | • | ||||
LCDIF | parallel display | • | • | • | • | • | • | • | FG0700M0DSSWMG01 | ||
LRADC | 4/5-wire touch-screen | • | • | • | • | • | • | • | |||
OCOTP | • | • | • | • | |||||||
SAIF0 | SGTL5000 | • | • | • | • | • | • | • | |||
SAIF1 | |||||||||||
SPDIF | |||||||||||
SSP0 | eMMC | • | • | • | • | • | • | • | boot device TQMa28x Rev. ≥ 0202/TQMa28L Rev. ≥ 0103 have eMMC 5.0 devices assembled which are supported with BSP Rev. ≥ 0115 A patch Linux BSP TQMaxx Rev.0109 - Fix eMMC 5.0 detection is available for BSP REV.0109 |
||
SSP1 | SD card | • | • | • | • | • | • | • | boot device | ||
SSP2 | SS1 & SS2 are not available in default pin multiplexing, used for USB overcurrent detection | ||||||||||
SSP3 | disabled in default pin multiplexing | ||||||||||
SWITCH | 3-Port Ethernet Switch | • | ○ | ○ | ○ | ○ | ○ | ○ | only available in platform tqma28-fsl | ||
USB0 | Host | • | • | • | • | • | • | • | mass storage, human interface devices | ||
OTG | • | • | • | • | ○ | ○ | ○ | MBa28: Host mode only (USB_ID tied to GND) | |||
USB1 | Host | • | • | • | • | • | • | • | mass storage, human interface devices | ||
LM73 | I2C1 | Temperature sensor | • | • | • | • | • | • | • | ||
M24C64 | I2C1 | EEPROM | • | • | • | • | • | • | • | ||
MBa28 | LM73 | Temperature sensor | • | • | • | • | • | • | • | ||
PCA9554D (0x20) | GPO | 8 x Output (X1) | • | • | • | • | • | • | • | ||
PCA9554D (0x21) | GPI | 4 x Input (X1) | • | • | • | • | • | • | • | ||
USERLED | 2 x LED | • | • | • | • | • | • | • | |||
SGTL5000 | Audio Codec | Audio Out | • | • | • | • | • | • | • | ||
Microphone In | on request |
Table primarily applies to platform tqma28, please see changelog for details on differences to platform tqma28-fsl
Changelog
2014/07/02 - REV 0108 (internal)
2014/06/06 - REV 0107 (snapshot)
[REV0105 - internal testing stage]
[REV0104.5 - U-Boot 2013.04 for production, no change to REV0105]
[REV0104 skipped - internal development]
[REV0103 skipped - tag error in git repository]