Differences

This shows you the differences between two versions of the page.

--- en:arm:tqma57xx:mba57xx:dip_switches [2020/08/25 11:56] – weinholdo
+++ en:arm:tqma57xx:mba57xx:dip_switches [2022/08/04 15:02] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-<WRAP round important> **Work in Progress**</WRAP>
+<alert type="warning" dismiss="false" icon="fa fa-warning">Work in Progress.</alert>
-====== MBa57xx DIP switch settings ======
 ===== Boot Device Selection (S1, S2) =====
-To select the desired boot medium set the DIP switches S1 and S2 accordingly.
+To select the desired boot medium set the DIP switches S1 and S2 accordingly. \\
+The following boot modes of the AM57XX can be selected by the DIP switches S1 and S2 on the MBa57xx.
-<WRAP clear></WRAP>
+----
-The following boot modes of the AM57XX can be selected by the DIP switches S1 and S2 on the MBa57xx.
+<grid>
+<col sm="4">
+<panel type="primary" title="SD-Card">
+<grid>
+<col sm="6">
 <WRAP centeralign>
-==== SD Card ====
+[size=150%]**S1**[/size]
-^ |:::  ^  S1  ||||||||::: ^  S2  ||||||||
+{{ :en:dip_8_10000001.png?nolink&150 |}}
-^ |:::  ^ {{ :en:arm:tqma57xx:mba57xx:mba57xx_s1_sd.png?nolink&100 |}}||||||||::: ^ {{ :en:arm:tqma57xx:mba57xx:mba57xx_s2_sd.png?nolink&100 |}} ||||||||
+</WRAP>
-^  DIP  |::: ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | :::  ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  |
+</col>
-^  ON   |:::|•| | | | | | |•|:::| | |•|•| | | | |
-^  OFF  |:::| |•|•|•|•|•|•| |:::|•|•| | |•|•|•|•|
-==== eMMC ====
-^ |:::  ^  S1  ||||||||::: ^  S2  ||||||||
-^ |:::  ^ {{ :en:arm:tqma57xx:mba57xx:mba57xx_s1_emmc.png?nolink&100 |}}||||||||::: ^ {{ :en:arm:tqma57xx:mba57xx:mba57xx_s2_emmc.png?nolink&100 |}} ||||||||
-^  DIP  |::: ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | :::  ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  |
-^  ON   |:::|•| | | | | | |•|:::| | |•| | | | | |
-^  OFF  |:::| |•|•|•|•|•|•| |:::|•|•| |•|•|•|•|•|
-==== QSPI NOR ====
+<col sm="6">
-^ |:::  ^  S1  ||||||||::: ^  S2  ||||||||
+<WRAP centeralign>
-^ |:::  ^ {{ :en:arm:tqma57xx:mba57xx:mba57xx_s1_qspi.png?nolink&100 |}}||||||||::: ^ {{ :en:arm:tqma57xx:mba57xx:mba57xx_s2_qspi.png?nolink&100 |}} ||||||||
+[size=150%]**S2**[/size]
-^  DIP  |::: ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | :::  ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  |
+{{ :en:dip_8_00110000.png?nolink&150 |}}
-^  ON   |:::|•| | | | | | |•|:::| | |•|•| |•|•| |
-^  OFF  |:::| |•|•|•|•|•|•| |:::|•|•| | |•| | |•|
 </WRAP>
+</col>
+</grid>
+</panel>
+</col>
-----
+<col sm="4">
-===== CAN configuration (S3 / S7) =====
-DIP switch S3 is used to configure the CAN interfaces CAN1 and CAN2.
-<WRAP>Both switches must be set to **ON** or **OFF** otherwise the CAN Bus has an improper termination.</WRAP>
+<panel type="primary" title="eMMC">
-\\
-<WRAP group>
-<WRAP centeralign half column>
-^ DIP  ^  S3-1/S7-1  ^  S3-2/S7-2  ^
-|  ON  |  CAN Bus not terminated  | CAN Bus terminated (120Ω) |
-|  OFF (default)  |  CAN BUS not terminated  | CAN Bus not terminated (120Ω) |
+<grid>
+<col sm="6">
+<WRAP centeralign>
+[size=150%]**S1**[/size]
+{{ :en:dip_8_10000001.png?nolink&150 |}}
 </WRAP>
+</col>
+<col sm="6">
+<WRAP centeralign>
+[size=150%]**S2**[/size]
+{{ :en:dip_8_00100000.png?nolink&150 |}}
 </WRAP>
-<WRAP clear></WRAP>
+</col>
+</grid>
+</panel>
+</col>
+<col sm="4">
-----
+<panel type="primary" title="QSPI NOR">
-===== RS485 configuration (S5) =====
-DIP switch S5 is used to configure the RS485 interface.
-\\
-<WRAP group>
-<WRAP half column>
-^ DIP  ^  OFF (default)  ^  ON  ^
+<grid>
-|  S5-1  |  RS485 TxD not terminated  |  RS485 TxD terminated (120Ω)  |
+<col sm="6">
-|  S5-2  |  RS485 RxD not terminated  |  RS485 RxD terminated (120Ω)  |
+<WRAP centeralign>
+[size=150%]**S1**[/size]
-</WRAP>
+{{ :en:dip_8_10000001.png?nolink&150 |}}
 </WRAP>
-<WRAP clear></WRAP>
+</col>
+<col sm="6">
+<WRAP centeralign>
+[size=150%]**S2**[/size]
+{{ :en:dip_8_00110110.png?nolink&150 |}}
+</WRAP>
+</col>
+</grid>
+</panel>
+</col>
+</grid>
+===== Functional DIP Switches =====
+DIP-Switch settings for interfaces like JTAG, RS485 and CAN.
 ----
+<grid>
+<col sm="6">
+<panel type="primary" title="CAN1 (X5)">
+DIP switch S3 is used to configure the CAN interface CAN1. \\
+Both switches must be set to **ON** or **OFF** otherwise the CAN Bus has an improper termination.
+^  DIP  ^  S3-1 & S3-2  |
+^  ON  |  CAN Bus not terminated  |
+^  OFF (default)  |  CAN Bus terminated (120Ω)  |
+</panel>
+</col>
-===== JTAG configuration (S13) =====
+<col sm="6">
-DIP switch S13 is used to configure the JTAG interface.
+<panel type="primary" title="CAN2 (X6)">
- \\
+DIP switch S7 is used to configure the CAN interface CAN2. \\
-<WRAP group>
+Both switches must be set to **ON** or **OFF** otherwise the CAN Bus has an improper termination.
-<WRAP centeralign half column>
+^  DIP  ^  S7-1 & S7-2  |
+^  ON  |  CAN Bus not terminated  |
+^  OFF (default)  |  CAN Bus terminated (120Ω)  |
+</panel>
+</col>
+</grid>
-^ DIP  ^  OFF  ^  ON  ^
-|  S5-1  |  JTAG via Micro-USB (x10)  |  JTAG via connector X11  |
-</WRAP>
+<grid>
-</WRAP>
+<col sm="6">
-<WRAP clear></WRAP>
+<panel type="primary" title="RS485 configuration (S5)">
+DIP switch S5 is used to configure the RS485 interface. \\
+^  DIP  ^  S5-1  ^  S5-2  |
+^  ON  |  RS485 TxD terminated (120Ω)  |  RS485 RxD terminated (120Ω)  |
+^  OFF (default)  |  RS485 TxD not terminated  |  RS485 RxD not terminated  |
+</panel>
+</col>
+<col sm="6">
+<panel type="primary" title="JTAG configuration (S13)">
+DIP switch S13 is used to configure the JTAG interface. \\
+^  DIP  ^  S13  |
+^  ON  |  JTAG via connector X11  |
+^  OFF  |  JTAG via Micro-USB (x10)  |
+</panel>
+</col>
+</grid>