Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
Next revisionBoth sides next revision
en:arm:tqma6x:mba6x:dip_switches [2017/04/20 17:46] – fixed emmc dip s1 liedmannen:arm:tqma6x:mba6x:dip_switches [2020/08/04 14:00] – added panel to boot mode liedmann
Line 3: Line 3:
 To select the desired boot medium set the DIP switches S1, S2, S4 and S5 accordingly. To select the desired boot medium set the DIP switches S1, S2, S4 and S5 accordingly.
  
-<WRAP round important 60%>Switching boot sources is only possible if the BOOT_MODE fuses are not programmed. If configured for "Boot from eFuses" but fuses are not programmed, the boot loader will not be able to determine the boot source. </WRAP>+<alert type="warning" icon="fa fa-warning">Switching boot sources is only possible if the BOOT_MODE fuses are not programmed.\\  If configured for "Boot from eFuses" but fuses are not programmed, the boot loader will not be able to determine the boot source.</alert>
  
 To enable boot device selection BOOT_MODE has to be set to "Internal Boot".\\ This can be done using DIP switch  To enable boot device selection BOOT_MODE has to be set to "Internal Boot".\\ This can be done using DIP switch 
 S5 on MBa6x: S5 on MBa6x:
- +<grid> 
-^ BOOT_MODE         ^ S5-1 ^ S5-2 ^+<col sm="6"> 
 +<panel type="default" title="Boot Modes" no-body="true"> 
 +^ BOOT_MODE         ^  S5-1  ^  S5-2  ^
 | Boot from eFuses  |  0   |  0   | | Boot from eFuses  |  0   |  0   |
 | Serial Downloader |  0   |  1   | | Serial Downloader |  0   |  1   |
 | Internal Boot     |  1   |  0   | | Internal Boot     |  1   |  0   |
 +</panel>
 +</col>
 +</grid>
  
 {{:en:arm:tqma6x:mba6x:mba6x_s5.jpg?500|}} {{:en:arm:tqma6x:mba6x:mba6x_s5.jpg?500|}}
 {{:en:arm:tqma6x:mba6x:mba6x_s1-s4.jpg?nolink&500|}} {{:en:arm:tqma6x:mba6x:mba6x_s1-s4.jpg?nolink&500|}}
  
 +<WRAP round important>  
 +Because of the SD/MMC Manufacture Mode of i.MX6 Solo (TQMa6S) and DualLite (TQMa6U),  
 +please remove the SD Card from the Starterkit. Otherwise the Starterkit will boot from SD Card although "serial Downloader" mode is set on DIP S5.  
 +\\ 
 +\\ 
 +For further information please see i.MX6 Solo and DualLite reference Manual chapter 8.11 SD/MMC Manufacture Mode 
 +</WRAP>
  
 <WRAP clear></WRAP> <WRAP clear></WRAP>
Line 23: Line 34:
  
 <WRAP centeralign> <WRAP centeralign>
-==== SD card ==== +<panel type="default" title="SD card"> 
-^ |:::  ^  S1  ||||||||::: ^  S2  ||||||||::: ^  S4  ||||||||::: ^ S5  ||+^ |:::  ^  S1  ||||||||::: ^  S2  ||||||||::: ^  S4  ||||||||::: ^  S5  ||
 ^ |:::  ^ {{ :en:arm:tqma6x:mba6x:mba6x_s1_sd.png?nolink&100 |}}||||||||:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s2_sd.png?nolink&100 |}}||||||||::: ^ ||||||||:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s5_1on.png?nolink&35 |}}^^ ^ |:::  ^ {{ :en:arm:tqma6x:mba6x:mba6x_s1_sd.png?nolink&100 |}}||||||||:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s2_sd.png?nolink&100 |}}||||||||::: ^ ||||||||:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s5_1on.png?nolink&35 |}}^^
 ^  DIP  |::: ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | :::  ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | ::: ^ 1 ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  |:::^  1  ^  2  ^ ^  DIP  |::: ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | :::  ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | ::: ^ 1 ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  |:::^  1  ^  2  ^
 ^  ON  |:::  | | • |  |  •  | | | | | ::: | | |  •  | |  •  | | | |:::^ ^ ^ ^ ^ ^ ^ ^  |:::| • | | ^  ON  |:::  | | • |  |  •  | | | | | ::: | | |  •  | |  •  | | | |:::^ ^ ^ ^ ^ ^ ^ ^  |:::| • | |
 ^  OFF  |::: | • | | • |  | • | • | • | • | ::: | • |  •  |  |  •  | | • | • | • |:::^ ^ ^ ^ ^ ^ ^ ^ |:::| | • |  ^  OFF  |::: | • | | • |  | • | • | • | • | ::: | • |  •  |  |  •  | | • | • | • |:::^ ^ ^ ^ ^ ^ ^ ^ |:::| | • | 
-</WRAP>+</panel>
  
  
  
-<WRAP centeralign> + 
-==== eMMC ====+<panel type="default" title="eMMC">
 ^ |::: ^  S1  ||||||||::: ^  S2  ||||||||::: ^  S4  ||||||||::: ^  S5  ||     ^ |::: ^  S1  ||||||||::: ^  S2  ||||||||::: ^  S4  ||||||||::: ^  S5  ||    
 ^ |::: ^{{ :en:arm:tqma6x:mba6x:mba6x_s1_emmc.png?nolink&100 |}}||||||||:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s2_emmc.png?nolink&100 |}}||||||||:::  ^ ||||||||::: ^{{  :en:arm:tqma6x:mba6x:mba6x_s5_1on.png?nolink&35  |}}^^ ^ |::: ^{{ :en:arm:tqma6x:mba6x:mba6x_s1_emmc.png?nolink&100 |}}||||||||:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s2_emmc.png?nolink&100 |}}||||||||:::  ^ ||||||||::: ^{{  :en:arm:tqma6x:mba6x:mba6x_s5_1on.png?nolink&35  |}}^^
 ^  DIP  |::: ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | :::  ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | ::: ^ 1 ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  |:::^  1  ^  2  ^ ^  DIP  |::: ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | :::  ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | ::: ^ 1 ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  |:::^  1  ^  2  ^
-^  ON  |:::  | | • | • | | | | • | | ::: | | • | | • | | | | |:::^ ^ ^ ^ ^ ^ ^ ^  |:::| • | | +^  ON  |:::  | | • | • | | | | | | ::: | | • | | • | | | | |:::^ ^ ^ ^ ^ ^ ^ ^  |:::| • | | 
-^  OFF  |::: | • | | | • | • | • | | • | ::: | • | | • | | • | • | • | • |:::^ ^ ^ ^ ^ ^ ^ ^ |:::| | • |  +^  OFF  |::: | • | | | • | • | • | • | • | ::: | • | | • | | • | • | • | • |:::^ ^ ^ ^ ^ ^ ^ ^ |:::| | • |  
-</WRAP> +</panel>
- +
  
-<WRAP centeralign> +<panel type="default" title="SPI-NOR">
-==== SPI-NOR ====+
 ^ |:::  ^  S1  ||||||||::: ^  S2  ||||||||::: ^  S4  ||||||||::: ^  S5  ||   ^ |:::  ^  S1  ||||||||::: ^  S2  ||||||||::: ^  S4  ||||||||::: ^  S5  ||  
 ^ |:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s1_spi.png?nolink&100 |}}||||||||:::  ^ ||||||||:::^ {{ :en:arm:tqma6x:mba6x:mba6x_s4_spi.png?nolink&100 |}}||||||||:::  ^ {{ :en:arm:tqma6x:mba6x:mba6x_s5_1on.png?nolink&35 |}}^^ ^ |:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s1_spi.png?nolink&100 |}}||||||||:::  ^ ||||||||:::^ {{ :en:arm:tqma6x:mba6x:mba6x_s4_spi.png?nolink&100 |}}||||||||:::  ^ {{ :en:arm:tqma6x:mba6x:mba6x_s5_1on.png?nolink&35 |}}^^
Line 51: Line 59:
 ^  ON  |:::  | | |  •  |  •  | | | | | :::^ ^ ^ ^ ^ ^ ^ ^ |::: | | |  |  •  |  •  | | |  |:::| • | | ^  ON  |:::  | | |  •  |  •  | | | | | :::^ ^ ^ ^ ^ ^ ^ ^ |::: | | |  |  •  |  •  | | |  |:::| • | |
 ^  OFF  |::: | • |  •  | | | • | • | • | • | :::^ ^ ^ ^ ^ ^ ^ ^ |::: | • |  •  |  •  | |  | • | • | • |:::| | • |  ^  OFF  |::: | • |  •  | | | • | • | • | • | :::^ ^ ^ ^ ^ ^ ^ ^ |::: | • |  •  |  •  | |  | • | • | • |:::| | • | 
-</WRAP>+</panel> 
 + 
  
  
 ---- ----
 +
 ===== CAN configuration (S13) ===== ===== CAN configuration (S13) =====
 DIP switch S13 is used to configure the CAN interfaces CAN1 and CAN2. DIP switch S13 is used to configure the CAN interfaces CAN1 and CAN2.
 +
  
 {{:en:arm:tqma6x:mba6x:mba6x_s13_can.jpg?nolink&500 |}} {{:en:arm:tqma6x:mba6x:mba6x_s13_can.jpg?nolink&500 |}}
  
-<WRAP group> +<WRAP clear></WRAP> 
-<WRAP centeralign half column>+ 
 + 
 + 
 +<WRAP half column>
 ==== Termination ==== ==== Termination ====
-^ DIP  ^ OFF (default)  ^  ON  ^ +^ DIP  ^  OFF (default)  ^  ON  ^ 
-| S13-1 |  CAN0 not terminated  | CAN0 terminated (120Ω) | +| S13-1 |  CAN0 not terminated  | CAN0 interface terminated (120Ω)  | 
-| S13-2 |  CAN1 not terminated  | CAN1 terminated (120Ω) |+| S13-2 |  CAN1 not terminated  | CAN1 interface terminated (120Ω)  | 
 </WRAP> </WRAP>
-<WRAP clear></WRAP>+ 
 + 
 + 
 + 
 ---- ----
 ===== RS485 configuration (S14) ===== ===== RS485 configuration (S14) =====
Line 75: Line 94:
  
 <WRAP clear></WRAP> <WRAP clear></WRAP>
-<WRAP group> 
  
-</WRAP> + 
-<WRAP centeralign half column>+ 
 +<WRAP half column>
 ==== Termination ==== ==== Termination ====
-^ DIP  ^ OFF (default)  ^  ON  ^+ 
 +^ DIP  ^  OFF (default)  ^  ON  ^
 | S14-1 |  RS485 RxD not terminated  | RS485 RxD terminated (120Ω) | | S14-1 |  RS485 RxD not terminated  | RS485 RxD terminated (120Ω) |
 | S14-2 |  RS485 TxD not terminated  | RS485 TxD terminated (120Ω) |  | S14-2 |  RS485 TxD not terminated  | RS485 TxD terminated (120Ω) | 
-</WRAP> 
 </WRAP> </WRAP>
  • Last modified: 2022/08/04 15:02