Differences

This shows you the differences between two versions of the page.

--- en:arm:tqma6x:mba6x:dip_switches [2020/08/04 14:00] – added panel to boot mode liedmann
+++ en:arm:tqma6x:mba6x:dip_switches [2022/08/04 15:02] (current) – external edit 127.0.0.1
@@ Line 3: / Line 3: @@
 To select the desired boot medium set the DIP switches S1, S2, S4 and S5 accordingly.
-<alert type="warning" icon="fa fa-warning">Switching boot sources is only possible if the BOOT_MODE fuses are not programmed.\\  If configured for "Boot from eFuses" but fuses are not programmed, the boot loader will not be able to determine the boot source.</alert>
+<callout type="warning" icon="true">Switching boot sources is only possible if the BOOT_MODE fuses are not programmed.\\  If configured for "Boot from eFuses" but fuses are not programmed, the boot loader will not be able to determine the boot source.</callout>
 To enable boot device selection BOOT_MODE has to be set to "Internal Boot".\\ This can be done using DIP switch
@@ Line 18: / Line 18: @@
 </grid>
-{{:en:arm:tqma6x:mba6x:mba6x_s5.jpg?500|}}
+<callout type="warning" icon="true">
-{{:en:arm:tqma6x:mba6x:mba6x_s1-s4.jpg?nolink&500|}}
-<WRAP round important>
 Because of the SD/MMC Manufacture Mode of i.MX6 Solo (TQMa6S) and DualLite (TQMa6U),
 please remove the SD Card from the Starterkit. Otherwise the Starterkit will boot from SD Card although "serial Downloader" mode is set on DIP S5.
@@ Line 27: / Line 24: @@
 \\
 For further information please see i.MX6 Solo and DualLite reference Manual chapter 8.11 SD/MMC Manufacture Mode
-</WRAP>
+</callout>
 <WRAP clear></WRAP>
@@ Line 33: / Line 30: @@
+<panel type="primary" title="SD-Card">
+<grid>
+<col sm="3">
 <WRAP centeralign>
-<panel type="default" title="SD card">
+[size=150%]**S1**[/size]
-^ |:::  ^  S1  ||||||||::: ^  S2  ||||||||::: ^  S4  ||||||||::: ^  S5  ||
+{{ :en:dip_8_01010000.png?nolink&270 |}}
-^ |:::  ^ {{ :en:arm:tqma6x:mba6x:mba6x_s1_sd.png?nolink&100 |}}||||||||:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s2_sd.png?nolink&100 |}}||||||||::: ^ ||||||||:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s5_1on.png?nolink&35 |}}^^
+</WRAP>
-^  DIP  |::: ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | :::  ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | ::: ^ 1 ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  |:::^  1  ^  2  ^
+</col>
-^  ON  |:::  | | • |  |  •  | | | | | ::: | | |  •  | |  •  | | | |:::^ ^ ^ ^ ^ ^ ^ ^  |:::| • | |
-^  OFF  |::: | • | | • |  | • | • | • | • | ::: | • |  •  |  |  •  | | • | • | • |:::^ ^ ^ ^ ^ ^ ^ ^ |:::| | • |
-</panel>
+<col sm="3">
+<WRAP centeralign>
+[size=150%]**S2**[/size]
+{{ :en:dip_8_00101000.png?nolink&270 |}}
+</WRAP>
+</col>
+<col sm="3">
+<WRAP centeralign>
+[size=150%]**S4**[/size]
+{{ :en:dip_8_xxxxxxxx.png?nolink&270 |}}
+S4 has no effect
+</WRAP>
+</col>
+<col sm="3">
-<panel type="default" title="eMMC">
+<WRAP centeralign>
-^ |::: ^  S1  ||||||||::: ^  S2  ||||||||::: ^  S4  ||||||||::: ^  S5  ||
+[size=150%]**S5**[/size]
-^ |::: ^{{ :en:arm:tqma6x:mba6x:mba6x_s1_emmc.png?nolink&100 |}}||||||||:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s2_emmc.png?nolink&100 |}}||||||||:::  ^ ||||||||::: ^{{  :en:arm:tqma6x:mba6x:mba6x_s5_1on.png?nolink&35  |}}^^
+{{ :en:dip_2_10.png?nolink&85 |}}
-^  DIP  |::: ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | :::  ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | ::: ^ 1 ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  |:::^  1  ^  2  ^
+</WRAP>
-^  ON  |:::  | | • | • | | | | | | ::: | | • | | • | | | | |:::^ ^ ^ ^ ^ ^ ^ ^  |:::| • | |
+</col>
-^  OFF  |::: | • | | | • | • | • | • | • | ::: | • | | • | | • | • | • | • |:::^ ^ ^ ^ ^ ^ ^ ^ |:::| | • |
+</grid>
+\\
+----
 </panel>
-<panel type="default" title="SPI-NOR">
+<panel type="primary" title="eMMC">
-^ |:::  ^  S1  ||||||||::: ^  S2  ||||||||::: ^  S4  ||||||||::: ^  S5  ||
-^ |:::  ^{{ :en:arm:tqma6x:mba6x:mba6x_s1_spi.png?nolink&100 |}}||||||||:::  ^ ||||||||:::^ {{ :en:arm:tqma6x:mba6x:mba6x_s4_spi.png?nolink&100 |}}||||||||:::  ^ {{ :en:arm:tqma6x:mba6x:mba6x_s5_1on.png?nolink&35 |}}^^
-^  DIP  |::: ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | :::  ^  1  ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  | ::: ^ 1 ^  2  ^  3  ^  4  ^  5  ^  6  ^  7  ^  8  |:::^  1  ^  2  ^
-^  ON  |:::  | | |  •  |  •  | | | | | :::^ ^ ^ ^ ^ ^ ^ ^ |::: | | |  |  •  |  •  | | |  |:::| • | |
-^  OFF  |::: | • |  •  | | | • | • | • | • | :::^ ^ ^ ^ ^ ^ ^ ^ |::: | • |  •  |  •  | |  | • | • | • |:::| | • |
-</panel>
+<grid>
+<col sm="3">
+<WRAP centeralign>
+[size=150%]**S1**[/size]
+{{ :en:dip_8_01100000.png?nolink&270 |}}
+</WRAP>
+</col>
+<col sm="3">
+<WRAP centeralign>
+[size=150%]**S2**[/size]
+{{ :en:dip_8_01010000.png?nolink&270 |}}
+</WRAP>
+</col>
+<col sm="3">
+<WRAP centeralign>
+[size=150%]**S4**[/size]
+{{ :en:dip_8_xxxxxxxx.png?nolink&270 |}}
+S4 has no effect
+</WRAP>
+</col>
+<col sm="3">
+<WRAP centeralign>
+[size=150%]**S5**[/size]
+{{ :en:dip_2_10.png?nolink&85 |}}
+</WRAP>
+</col>
+</grid>
+\\
 ----
+</panel>
-===== CAN configuration (S13) =====
+<panel type="primary" title="SPI NOR">
-DIP switch S13 is used to configure the CAN interfaces CAN1 and CAN2.
+<grid>
+<col sm="3">
+<WRAP centeralign>
+[size=150%]**S1**[/size]
+{{ :en:dip_8_00110000.png?nolink&270 |}}
+</WRAP>
+</col>
-{{:en:arm:tqma6x:mba6x:mba6x_s13_can.jpg?nolink&500 |}}
+<col sm="3">
+<WRAP centeralign>
+[size=150%]**S2**[/size]
+{{ :en:dip_8_xxxxxxxx.png?nolink&270 |}}
+S2 has no effect
+</WRAP>
+</col>
-<WRAP clear></WRAP>
+<col sm="3">
+<WRAP centeralign>
+[size=150%]**S4**[/size]
+{{ :en:dip_8_00011000.png?nolink&270 |}}
+</WRAP>
+</col>
+<col sm="3">
+<WRAP centeralign>
-<WRAP half column>
+[size=150%]**S5**[/size]
-==== Termination ====
+{{ :en:dip_2_10.png?nolink&85 |}}
-^ DIP  ^  OFF (default)  ^  ON  ^
-| S13-1 |  CAN0 not terminated  | CAN0 interface terminated (120Ω)  |
-| S13-2 |  CAN1 not terminated  | CAN1 interface terminated (120Ω)  |
 </WRAP>
+</col>
+</grid>
+\\
+----
+</panel>
+===== Functional DIP Switches =====
+DIP-Switch settings for CAN and RS485.
+<grid>
+<col sm="6">
+<panel type="primary" title="CAN configuration (S13)">
+DIP switch S13 is used to configure the CAN interfaces CAN1 and CAN2.
+^  DIP  ^  OFF (default)  ^  ON  ^
+|  S13-1  |  CAN0 not terminated  |  CAN0 interface terminated (120Ω)  |
+|  S13-2  |  CAN1 not terminated  |  CAN1 interface terminated (120Ω)  |
+</panel>
+</col>
+<col sm="6">
-----
+<panel type="primary" title="RS485 configuration (S14)">
-===== RS485 configuration (S14) =====
 DIP switch S14 is used to configure the RS485 interface.
+^  DIP  ^  OFF (default)  ^  ON  ^
+|  S14-1  |  RS485 RxD not terminated  |  RS485 RxD terminated (120Ω)  |
+|  S14-2  |  RS485 TxD not terminated  |  RS485 TxD terminated (120Ω)  |
+</panel>
+</col>
-{{:en:arm:tqma6x:mba6x:mba6x_s14_rs485.jpg?nolink&500 |}}
+</grid>
-<WRAP clear></WRAP>
+----
-<WRAP half column>
-==== Termination ====
-^ DIP  ^  OFF (default)  ^  ON  ^
-| S14-1 |  RS485 RxD not terminated  | RS485 RxD terminated (120Ω) |
-| S14-2 |  RS485 TxD not terminated  | RS485 TxD terminated (120Ω) |
-</WRAP>