Embedded module TQMa6x - VxWorks BSP documentation
BSP Overview
due to licensing restrictions this BSP is available only on request
Bootloader
u-boot Version
u-boot 2013.04-20140226
u-boot Features
| Component | Status | Remarks |
|---|---|---|
| CPU | + | i.MX6Q (Cortex®-A9) |
| Ethernet | + | 1 x FEC (100 MBit working, GiGE under investigation) |
| + | USB - Ethernet Bridge | |
| eSDHC | + | SD card / eMMC |
| UART | + | one for console |
| I²C | + | EEPROM, Temperature Sensors |
| GPIO | custum configuration on request | |
| IIM/Fuse | - | on request |
| SPI | + | SPI NOR Flash |
| eMMC / SD boot | + | |
| TFTP boot | + | |
| SPI NOR boot | + | |
| Key: + tested | - untested | ? open | ||
Operating System VxWorks 7
BSP has been created for STKa6Q (TQMa6Q + MBa6x)
| TQ Product | Device | Interface | Function | Remarks |
|---|---|---|---|---|
| TQMa6x | i.MX6 | ENET (X11) | RGMII (10/100/1000 Mbit/s) | |
| I2C3 | Bus access | |||
| UART2 (X15) | ||||
| GPIO | ||||
| USB_OTG | Host | |||
| USB_OTG | Client | |||
| IPU1 | Parallel LCD | Display ET0700G0DH6 | ||
| HDMI | HDMI | tested with 1280×1024 |
the BSP kernel is configured for HDMI video output by default. You have to compile a new kernel for the parallel LCD.