Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
en:general_information:tutorial:uboot_tools [2020/07/15 14:43] – external edit 127.0.0.1en:general_information:tutorial:uboot_tools [2022/08/04 15:02] (current) – external edit 127.0.0.1
Line 3: Line 3:
 ===== U-Boot Tools ===== ===== U-Boot Tools =====
  
-U-Boot provides two tools to read **fw_setenv** and  edit **fw_printenv** the U-Boot environment from the Linux shell.   The U-Boot tools are selected by default in PTXdist based BSP's. This tutorial describes how to setup the configuration file and the usage of the tools mentioned above.  +U-Boot provides two tools to read **fw_printenv** and  edit **fw_setenv** the U-Boot environment from the Linux shell.   The U-Boot tools are selected by default in PTXdist based BSP's. This tutorial describes how to setup the configuration file and the usage of the tools mentioned above.  
  
 <WRAP round info 90%>Working with U-Boot tools requires that the U-Boot environment has been saved with the ''saveenv'' command in U-Boot, otherwise the U-Boot tools are using the default environment.\\       <WRAP round info 90%>Working with U-Boot tools requires that the U-Boot environment has been saved with the ''saveenv'' command in U-Boot, otherwise the U-Boot tools are using the default environment.\\      
  • Last modified: 2022/08/04 15:04