Embedded module TQMP1020 - Linux BSP documentation
U-Boot
Version
U-Boot 2012.10-rc1
Features
| Component | Status | Remarks |
|---|---|---|
| CPU | + | 2 x e500v2 core |
| Ethernet | + | 3 x eTSEC |
| PCIe | + | 2 x |
| USB 2.0 | + | 1 x Host (mass storage) |
| eSDHC | + | SD card STKP2020 rev 106+ required |
| eSPI | - | |
| DDR SDRAM | + | DDR3 |
| PIC | + | |
| DUART | + | UART0 |
| I²C | + | 2 x EEPROM, RTC, Temperature sensor |
| eLBC | + | NOR-Flash |
| Key: + tested | - untested | ? open | ||
Version
U-Boot 2011.03
Features
| Component | Status | Remarks |
|---|---|---|
| CPU | + | 2 x e500v2 core |
| Ethernet | + | 3 x eTSEC |
| PCIe | + | 2 x |
| USB 2.0 | + | 1 x Host (mass storage) |
| eSDHC | - | currently not working |
| eSPI | - | |
| DDR SDRAM | + | DDR3 |
| PIC | + | |
| DUART | + | UART0 |
| I²C | + | 2 x EEPROM, RTC, Temperature sensor |
| eLBC | + | NOR-Flash |
| Key: + tested | - untested | ? open | ||
==== Environment settings ==== ^ Variable name ^ Purpose ^ Default value ^ Valid values ^ | ethaddr | Provide MAC address | hw specific | valid MAC address, optionally seperated by colons (:)|