en

User Tools

Site Tools


vmware.png nfs.png tftp.png subversion.png eclipse.png logo.png tutorial.png

Table of Contents

Embedded module TQMP2020 - Linux BSP documentation



U-Boot

Version

U-Boot 2012.10-rc1

Features

Component Status Remarks
CPU + 2 x e500v2 core
Ethernet + 3 x eTSEC
PCIe + 2 x
USB 2.0 + 1 x Host (mass storage)
eSDHC + SD card
STKP2020 rev 106+ required
eSPI -
DDR SDRAM + DDR3
PIC +
DUART + UART0
I²C + 2 x EEPROM, RTC, Temperature sensor
eLBC + NOR-Flash
Key: + tested | - untested | ? open

Version

U-Boot 2011.03

Features

Component Status Remarks
CPU + 2 x e500v2 core
Ethernet + 3 x eTSEC
PCIe + 2 x
USB 2.0 + 1 x Host (mass storage)
eSDHC - currently not working
eSPI -
DDR SDRAM + DDR3
PIC +
DUART + UART0
I²C + 2 x EEPROM, RTC, Temperature sensor
eLBC + NOR-Flash
Key: + tested | - untested | ? open

==== Environment settings ==== ^ Variable name ^ Purpose ^ Default value ^ Valid values ^ | ethaddr | Provide MAC address | hw specific | valid MAC address, optionally seperated by colons (:)|


en/power/tqmp2020/linux/boot_loader.txt · Last modified: 2017/09/18 16:32 by liedmann


Disclaimer

TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.


Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Recent changes RSS feed Valid XHTML 1.0 Valid CSS Driven by DokuWiki