====== Touchscreen Configuration ======

<WRAP round important> Before starting, make sure you have enabled touchscreen support in the device tree of the STK </WRAP>

To set up the Touchscreen on STKa335x or STKa6x start with a simple fb_test to make sure the device is working properly.

After startup, run the command 
<code> fb_test </code> 
which launches a variety of tests, consisting of both black and white and coloured images.

Afterwards, calibrate the Touchscreen with
<code> ts_calibrate </code>

<WRAP round important> Sometimes the system does not recognize that a touchscreen device is connected. If so, you will have to export Tslib before starting the calibration. Should this be the case, run the command "export TSLIB_TSDEVICE=/dev/input/event2", then recalibrate. </WRAP>

To make sure everything is working as intended, run
<code> ts_test </code>