Known Issues scarthgap.TQ.ARM.BSP.0006
- The power supply (VBUS) of the USB-OTG (X40) port can't be disabled on the
MBLS102xA. The port must not be used in device mode.
- Enumeration of USB devices connected to the USB-OTG port (X40) via a USB-OTG
cable fails
- After Power-On or restart the display might be blanked
Use
echo 0 > /sys/class/backlight/backlight/bl_power to unblank the display
- HDMI's DDC channel is shared with on-board I2C. Not all displays might be supported
due to address conflicts with DDC device IDs.
- USB (X40) does not work
- u-boot
- Default MTD partition layout and boot script don't load files from UBIFS
- No USB support
- Linux: currently no out of the box support for Linux kernel on SPI-NOR
tq-image-small-debug image from spaetzle distribution is too large
- RGB displays stay black although drivers are initialized properly