Windows Embedded Compact
Version
Windows Embedded Compact 2013
Features
Preliminary fearure list
Features planned for Linux-BSP for TQMa335x+MBa335x | ||||||
---|---|---|---|---|---|---|
Component | Device | Interface | Function | REV.100 | Remarks | |
TQMa335x | AM335x | UART0 | RS485 | • | ||
AM335x | UART4 | RS232 | • | |||
AM335x | USB0 | USB HOST | • | USB2517 Switch on mba335x | ||
AM335x | USB1 | USB OTG | • | USB Device | ||
AM335x | DCAN0 | CAN 2.0B | • | |||
AM335x | DCAN1 | CAN 2.0B | • | |||
AM335x | SGX | PowerVR Graphics | Framebuffer driver No hardware acceleration | |||
AM335x | I2C0 | EEPROM Temp. Sensor | • | |||
AM335x | I2C1 | Bus Access | • | |||
AM335x | I2C2 | Multiplexed | ||||
AM335x | MCASP | Audio | ||||
AM335x | SPI0 | SPI NOR Flash | • | |||
AM335x | SPI1 | |||||
AM335x | SPI2 | Multiplexed | ||||
AM335x | SPI3 | Multiplexed | ||||
AM335x | GPIO | • | ||||
AM335x | CPSW_3G | RGMII FEC 1 | • | Only 100Base-T works, 1000Base-T with hardware modification (fixed with MBa335x Rev. ≥103) | ||
AM335x | CPSW_3G | RGMII FEC 2 | • | Only 100Base-T works, 1000Base-T with hardware modification (fixed with MBa335x Rev. ≥103) | ||
AM335x | PRU-ICSS | on request | Muxed with LCD On Request | |||
AM335x | TSC_ADC | Touch | • | Tested with ET0700G0DH8 | ||
am335x | lcd | Timing for ET0700G0DH8 | ||||
am335x | mmchs | |||||
am335x | buzzer | |||||
am335x | mmc0 | SD card interface | • | Writing on SD-Card only with hardware modification (fixed with MBa335x Rev. ≥103) | ||
am335x | mmc1 | emmc | • | |||
mba335x | usb2517 | usb1 | usb 2.0 | |||
usb2517 | usb2 | usb 2.0 | ||||
usb2517 | usb3 | usb 2.0 | ||||
usb2517 | usb4 | usb 2.0 | Not tested | |||
usb2517 | usb5 | lvds-cmd | Not tested | |||
USB2517 | USB6 | USB 2.0 | Not tested | |||
USB2517 | USB7 | Mini PCIe | Not tested |
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.