Overview
Due to licensing restrictions this BSP is available only on request
QNX Neutrino
QNX Neutrino 6.5.0
| Component | Device | Interface | Function | Status | Remarks |
|---|---|---|---|---|---|
| TQMa335x | AM335x | AUART0 | RS485 | ||
| AM335x | AUART3 | TTL | |||
| AM335x | AUART4 | RS232 | |||
| AM335x | USB0 | USB2517 Switch on MBa335x | |||
| AM335x | DCAN0 | ||||
| AM335x | DCAN1 | ||||
| AM335x | I2C0 | ||||
| AM335x | SPI0 | ||||
| AM335x | CPSW_3G | RGMII FEC 1 | |||
| AM335x | CPSW_3G | RGMII FEC 2 | |||
| AM335x | TSC_ADC | Touch | |||
| AM335x | LCD | Timing for ET0700G0DH6 | |||
| AM335x | mmc0 | SD card interface | |||
| AM335x | mmc1 | emmc | |||
| MBa335x | USB2517 | usb1 | usb 2.0 | ||
| USB2517 | usb2 | usb 2.0 | |||
| USB2517 | usb3 | usb 2.0 | |||
| Key: + tested | - untested | ? open issues | $ on request | |||||
Bootloader
u-boot 2013.07
| Component | Status | Remarks |
|---|---|---|
| CPU | + | Cortex-A8 |
| Ethernet | + | 1 x CPSW (100 MBit working, GiGE with hardware modification (fixed with MBa335x Rev. ≥103)) |
| eSDHC | + | eMMC / SD Card |
| UART | + | |
| I²C | + | EEPROM |
| SPI | + | SPI NOR Flash |
| eMMC / SD boot | + | |
| TFTP boot | + | |
| SPI NOR boot | + | |
| USB Host | + | tested with USB Mass Storage Device (USB-Stick) |
| Key: + tested | - untested | ? open | ||
Onboard I2C devices
| I2C bus | TQMa335x | ||||||
|---|---|---|---|---|---|---|---|
| I2C0 | 0x12 PMIC | 0x1F Tempsensor | 0x2D PMIC | 0x50 EEPROM | 0x57 EEPROM | 0x68 RTC (optional DS1339) |
|
| I2C bus | MBa335x | |||||
|---|---|---|---|---|---|---|
| I2C0 | 0x18 Audio Codec | 0x19 Tempsensor | 0x20 PCA9554 | 0x21 PCA9554 | 0x51 EEPROM |
|
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.