Linux
Version
Linux 3.9 (BSP 0105)
Linux 3.5 (up to BSP 0104)
Features
| Device | Component | Status | Version | BSP rev. | Remarks |
|---|---|---|---|---|---|
| i.MX53 | CPU | + | 3.5 / 3.9 | 0100 | i.MX53 rev 2.1 (Cortex A8) |
| Ethernet (FEC) | + | 3.5 / 3.9 | 0100 | ||
| DVI Display | + | 3.5 / 3.9 * | 0101 | for Rev 0102 see here for a fix | |
| LVDS Display | + | 3.5 / 3.9 * | 0101 | see Change from DVI to LVDS output Output clone only |
|
| parallel Display | + | 3.5 / 3.9 * | 0101 | see Change from DVI to parallel LCD | |
| VGA | + | 3.9 * | 0105 | see Change from DVI to VGA | |
| USB 2.0 | + | 3.5 / 3.9 * | 0102 | OTG Host, see howto configure OTG port | |
| eSDHC | + | 3.5 / 3.9 | 0101 | SD-CARD / eMMC | |
| SATA | + | 3.9 | 0105 | only with u-boot | |
| GPIO | + | 3.5 / 3.9 | 0100 | ||
| SPI | + | 3.5 / 3.9 | 0102 | known to be work on customized base boards | |
| UART | + | 3.5 / 3.9 | 0100 | ||
| I²C | + | 3.5 / 3.9 | 0100 | EEPROM, Temprature sensor, GPIO expander | |
| CAN | + | 3.5 / 3.9 | 0101 | ||
| Audio | + | 3.5 / 3.9 | 0103 | SDMA firmware needed, see here | |
| RTC (PMIC) | + | 3.9 * | 0105 | ||
| Touch (PMIC) | + | 3.9 * | 0105 | ||
| Touch (RS232 / USB) | + | 3.5 / 3.9 | 0102 | ||
| GPU | + | 3.5 / 3.9 * | 0104 | tested with Freescale binaries, see here | |
| VPU | + | 3.9 * | 0105 | CODA firmware needed, see here | |
| CSI | $ | on request | |||
| EIM | $ | on request tested on custom mainboard with 16 bit SRAM |
|||
| MBa53(LAN9514) | Ethernet | + | 3.9 | 0105 | |
| USB 2.0 | + | 3.5 / 3.9 * | 0102 | 2 x Host | |
| Key: + tested | - untested | ? open | * patches in BSP | $ on request | |||||
Changelog
Rev 0105
- Feature: linux 3.9
- Feature: Touch / RTC (PMIC MC13708)
- Feature: VPU
- Feature: VGA
- Feature: Dual LVDS (only display cloning)
- Feature: SATA
Rev 0104
- Feature: GPU support
- Reenable dvi as default setting
Rev 0103
- Feature: Audio support
Rev 0102
- Feature: USB support
- Feature: fix SD-card enumeration order based on controller ID
- Feature: disable framebuffer console to prevent display deactivation
Rev 0101
- Update to linux 3.5
- Feature: device tree support
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.