Overview
Current versions & features
uboot v2011.12
Features
| Device | Interface | Function | Status | Remarks |
|---|---|---|---|---|
| i.MX53 | I2C-2 | Temp. Sensor LM75 | + | |
| i.MX53 | I2C-3 | Bus access | - | |
| i.MX53 | I2C-2 | EEPROM access | + | |
| i.MX53 | UART-2 | RS-232 | + | |
| i.MX53 | FEC | 10/100 Mbit/s | + | |
| LAN9514 (MBa53) | FEC | 10/100 Mbit/s | + |
| Key: + tested | - untested | ? open issues | $ on request |
QNX Neutrino 6.5.0
Features
| Device | Interface | Function | Status | Remarks |
|---|---|---|---|---|
| i.MX53 | UART-2 | RS-232 | + | Console → X1 |
| i.MX53 | UART-1 | RX 3.3V TTL TX 3.3V TTL | + + | X18.52 X18.54 |
| i.MX53 | FEC | 10/100Mbit Ethernet | + | X11 |
| i.MX53 | FLEXCAN | CAN1 CAN2 | + + | X3 X4 |
| LAN9514 (MBa53) | USB_HOST1 USB_HOST2 | USB Host | + + | X9 |
| Key: + tested | - untested | ? open issues | $ on request |
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.