Overview
Due to licensing restrictions this BSP is available only on request
Bootloader
Supported features
| Feature | BSP Revision | Remarks | |||
|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | Prerelease | |
| TQMa6ULx | i.MX6UL | Ethernet | RMII (10/100 Mbit/s) | • | |
| TQMa6ULx | i.MX6UL | uSDHC | eMMC / SD-Card | • | SD card / eMMC |
| TQMa6ULx | i.MX6UL | UART1 | RS232 | • | default console |
| TQMa6ULx | i.MX6UL | I²C | EEPROM | • | |
| TQMa6ULx | i.MX6UL | GPIO | custom config on request | ||
| TQMa6ULx | i.MX6UL | SPI | QSPI NOR Flash | • | |
| TQMa6ULx | i.MX6UL | IIM / Fuse | on request | ||
Supported boot devices
| Boot device | supported |
|---|---|
| eMMC | • |
| SD Card | • |
Operating System
Supported Features
| Feature | BSP Revision | Remarks | ||||
|---|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | QNX 6.6 | QNX 7.0.0 | |
| TQMa6ULx | i.MX6UL | eCSPI2 | • | • | No device on MBa6ULx | |
| i.MX6UL | ENET1 | RMII (10/100 Mbit/s) | • | • | ||
| i.MX6UL | ENET2 | RMII (10/100 Mbit/s) | • | • | ||
| i.MX6UL | FLEXCAN1 | CAN 2.0B | • | • | ||
| i.MX6UL | FLEXCAN2 | CAN 2.0B | • | • | ||
| i.MX6UL | FLEXTIMER | On request | ||||
| i.MX6UL | GPIO | 1x GPIO | On request | |||
| i.MX6UL | GPMI | Multiplexed with other functions (on request), no device MBa6ULx |
||||
| i.MX6UL | I2C2 | • | • | Not available by default configuration resistor R451 and R455 |
||
| i.MX6UL | I2C4 | I2C devices | • | • | RTC DS1339 other device on request | |
| i.MX6UL | eLCDIF | Parallel LCD | Q4/2017 | Q4/2017 | 24-bit interface available via X4 | |
| LVDS | Q4/2017 | Q4/2017 | 24-bit available via X17 | |||
| i.MX6UL | MIPI CSI | No device on MBa6ULx | ||||
| i.MX6UL | MIPI DSI | No device on MBa6ULx | ||||
| i.MX6UL | PWM2 | Buzzer | On request | |||
| i.MX6UL | PWM4 | Backlight Dimming | On request | |||
| i.MX6UL | QSPI | Bus access Memory access | On request | |||
| i.MX6UL | SAI1 | Audiocodec | On request Support for Codec WM8960 available |
|||
| i.MX6UL | TEMPMON | CPU temperature read on request | ||||
| i.MX6UL | UART1 | RS232/ USB Debug | • | • | Default console / USB debug connector selectable with S15 on MBA6ULx |
|
| i.MX6UL | UART2 | TTL | • | • | Multiplexed with other functions (on request) | |
| i.MX6UL | UART3 | TTL | • | • | Not available on MBa6ULx | |
| i.MX6UL | UART4 | TLL | • | • | Multiplexed with other functions (on request) | |
| i.MX6UL | UART5 | TLL | • | • | Multiplexed with other functions (on request) | |
| i.MX6UL | UART6 | RS485 | • | • | ||
| i.MX6UL | UART7 | TLL | Multiplexed with other functions (on request) | |||
| i.MX6UL | UART8 | TLL | Multiplexed with other functions (on request) | |||
| i.MX6UL | USB_Host | USB2517 | • | • | ||
| i.MX6UL | USB_OTG1 | Host | • | • | Only Host supported | |
| i.MX6UL | USB_OTG1 | OTG | Q3/2017 | Q3/2017 | ACM (Serial), NCM (Ethernet), CDC Mass Storage | |
| i.MX6UL | USB_OTG2 | Host | • | • | Only Host supported | |
| i.MX6UL | USB_OTG2 | OTG | Shared with USB2517 Hub [7:1] | |||
| i.MX6UL | uSDHC1 | SD Card (4-bit) | • | • | QNX6 Power Fail Filesystem | |
| i.MX6UL | uSDHC1 | eMMC (8-bit) | Q3/2017 | • | QNX6 Power Fail Filesystem (Optional Encryption) |
|
| MBa6ULx | TLV320AIC3204 | Headphone Out/ Line Out | On request | |||
| Line In | On request | |||||
| Microphone In | On request | |||||
| PCA9554BS | I2C GPIO expander | On request | ||||
| PCA9554BS | I2C GPIO expander | On request | ||||
| SIM | Not tested Available on Connector X22 on MBa6ULx |
|||||
| STMPE811 | resistive touch controller | Q4/2017 | Q4/2017 | Connected to I2C4 on MBa6ULx | ||
| USB2517 | USB1 | Host 1 | • | • | MBa6ULx X7 top | |
| USB2517 | USB2 | Host 2 | • | • | MBa6ULx X7 bottom | |
| USB2517 | USB3 | Host 3 | • | • | MBa6ULx X8 | |
| USB2517 | USB4 | Host 4 | • | • | ||
| USB2517 | USB5 | Host 5 | • | • | ||
| USB2517 | USB6 | Host 6 | • | • | ||
| USB2517 | USB7 | Host 7 | • | • | ||
| SNVS | Reset | Reset PMIC-Reset Power-Down Wake-Up | ||||
Onboard I2C devices
| I2C bus | TQMa6ULx | MBa6ULx | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| I2C4 | 0x08 PMIC | 0x1A Tempsensor | 0x50 EEPROM | 0x52 EEPROM | 0x68 RTC | 0x18 Audiocodec | 0x19 Tempsensor | 0x20 GPIO Expander | 0x21 GPIO Expander | 0x41 Touch Controller | 0x51 EEPROM |
||
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.