QNX Neutrino
| Feature | QNX Version | Remarks | ||||
|---|---|---|---|---|---|---|
| TQ Product | Device | Interface | Function | 6.6.0 | 7.0.0 | |
| TQMa6x | i.MX6 | ENET | RGMII (10/100/1000 Mbit/s) | • | • | |
| FLEXCAN1 | CAN 2.0B | • | • | |||
| FLEXCAN2 | CAN 2.0B | • | • | |||
| I2C1 | I2C devices | • | • | see connected onboard I2C devices | ||
| I2C3 | I2C devices | • | • | see connected onboard I2C devices | ||
| IPU1 | Parallel LCD | • | • | QNX screen graphics with Open GL ES gears demo | ||
| Touch | Touch FT5x | • | • | Display ETM0700G0DH6 | ||
| UART2 | RS232 | • | • | |||
| UART3 | TTL | • | • | |||
| UART4 | RS485 | • | • | |||
| UART5 | TTL | • | • | |||
| USB_UH1 | USB2517 | • | • | |||
| RTC | DS1339 | • | • | |||
| uSDHC | SD(HC)-Card sd2 SD card sd3 eMMC | • | • | |||
| Watchdog | • | • | ||||
| MBa6x | USB2517 | USB Host | • | • | ||
Connected onboard I2C devices
TQMa6x Rev.01xx / TQMa6x Rev.02xx Variant B
| I2C bus | TQMa6x | MBa6x | ||||
|---|---|---|---|---|---|---|
| I2C1 | 0x18 Audiocodec |
|||||
| I2C3 | 0x08 PMIC | 0x48 LM75 | 0x50 EEPROM | 0x49 LM75 | 0x57 EEPROM | 0x68 RTC |
TQMa6x Rev.02xx Variant A & C
| I2C bus | TQMa6x | MBa6x | |||||
|---|---|---|---|---|---|---|---|
| I2C1 | 0x08 PMIC | 0x48 LM75 | 0x50 EEPROM | 0x18 Audiocodec | 0x49 LM75 | 0x57 EEPROM | 0x68 RTC |
| I2C3 | not available due to ethernet patch | ||||||
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.