BSP Overview
Due to licensing restrictions this BSP is available only on request
Bootloader
u-boot Version
u-boot 2013.04-20140226
u-boot Features
| Component | Status | Remarks |
|---|---|---|
| CPU | + | i.MX6Q (Cortex A9) |
| Ethernet | + | 1 x FEC (100 MBit working, GiGE under investigation) |
| + | USB - Ethernet Bridge | |
| eSDHC | + | SD card / eMMC |
| UART | + | one for console |
| I²C | + | EEPROM, Temperature Sensors |
| GPIO | custum configuration on request | |
| IIM/Fuse | - | on request |
| SPI | + | SPI NOR Flash |
| eMMC / SD boot | + | |
| TFTP boot | + | |
| SPI NOR boot | + | |
| Key: + tested | - untested | ? open | ||
Operating System VxWorks 7
BSP has been created for STKa6Q (TQMa6Q + MBa6x)
| TQ Product | Device | Interface | Function | Remarks |
|---|---|---|---|---|
| TQMa6x | i.MX6 | ENET (X11) | RGMII (10/100/1000 Mbit/s) | |
| I2C3 | Bus access | |||
| UART2 (X15) | ||||
| GPIO | ||||
| USB_OTG | Host | |||
| USB_OTG | Client | |||
| IPU1 | Parallel LCD | Display ET0700G0DH6 | ||
| HDMI | HDMI | tested with 1280×1024 |
the BSP kernel is configured for HDMI video output by default. You have to compile a new kernel for the parallel LCD.
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.