Bootloader
Supported features
| Feature | BSP Revision | Remarks | ||||
|---|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | BSP REV.0101 | BSP REV.0104 | |
| TQMa7x | i.MX7 | Ethernet | 2x RGMII (10/100/1000 Mbit/s) | • | • | |
| TQMa7x | i.MX7 | Fuses | • | • | ||
| TQMa7x | i.MX7 | GPIO | • | • | custom config on request | |
| TQMa7x | i.MX7 | I²C | EEPROM, Temperature Sensors, RTC | • | • | |
| TQMa7x | i.MX7 | qSPI | QSPI SPI NOR Flash | • | • | |
| TQMa7x | i.MX7 | UART6 | RS232 | • | • | default console |
| TQMa7x | i.MX7 | USB | USB Storage Device | • | ||
| TQMa7x | i.MX7 | uSDHC | eMMC / SD-Card | • | • | SD card / eMMC |
Supported boot devices
| Boot device | supported |
|---|---|
| eMMC | • |
| SD Card | • |
| QSPI NOR |
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.