Overview
Due to licensing restrictions this BSP is available only on request
Bootloader
U-Boot 2016.03 (NXP imx-rel_imx_4.1.15_2.0.0_ga)
Supported features
| Feature | QNX Revision | Remarks | |||
|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | 6.6.0 | |
| TQMa7x | i.MX7 | Ethernet | 2x RGMII (10/100/1000 Mbit/s) | • | |
| TQMa7x | i.MX7 | Fuses | • | ||
| TQMa7x | i.MX7 | GPIO | • | custom config on request | |
| TQMa7x | i.MX7 | I²C | EEPROM, Temperature Sensors, RTC | • | |
| TQMa7x | i.MX7 | qSPI | QSPI SPI NOR Flash | • | |
| TQMa7x | i.MX7 | UART6 | RS232 | • | default console |
| TQMa7x | i.MX7 | USB | USB Storage Device | • | |
| TQMa7x | i.MX7 | uSDHC | eMMC / SD-Card | • | SD card / eMMC |
Supported boot devices
| Boot device | supported |
|---|---|
| eMMC | • |
| SD Card | • |
| QSPI NOR |
Operating System
Supported Features
| Feature | QNX Version | Remarks | |||
|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | 6.6.0 | |
| TQMa7x | i.MX7 | eCSPI1 | • | ||
| i.MX7 | eCSPI2 | • | |||
| i.MX7 | ENET1 | RGMII (10/100/1000 Mbit/s) | • | incompatible with MBa7x Rev.010x | |
| i.MX7 | FLEXCAN1 | CAN 2.0B | • | ||
| i.MX7 | FLEXCAN2 | CAN 2.0B | • | ||
| i.MX7 | I2C1 | I2C devices | • | see supported onboard I2C devices | |
| i.MX7 | I2C2 | I2C devices | • | see supported onboard I2C devices | |
| i.MX7 | LCD1 | Parallel LCD | LVDS and LCD1 are mutually exclusive, special devicetree needed comming soon with QNX7 |
||
| i.MX7 | PCIe | Device Discoery | on request | ||
| i.MX7 | QSPI | Bus access Memory access | on request | ||
| i.MX7 | UART3 | TTL | • | not available on MBa7x | |
| i.MX7 | UART4 | TTL | • | not available on MBa7x | |
| i.MX7 | UART5 | TTL | • | not available on MBa7x | |
| i.MX7 | UART6 | RS232 | • | Default Console | |
| i.MX7 | USB_Host | USB4604 | • | ||
| i.MX7 | USB_OTG1 | Host | • | ||
| i.MX7 | USB_OTG1 | OTG | • | ||
| i.MX7 | uSDHC | uSDHC1 SD Card uSDHC3 eMMC | • | HS200 / HS300 Mode for uSDHC3 HS MODE for SD Card on uSDHC1 needs switchable supply voltage, not available on MBA7x |
|
| MBa7x | USB4604 | USB1 | Host | • | |
| USB4604 | USB2 | Host | • | ||
Onboard I2C devices
TQMa7 REV.0100
| I2C bus | TQMa7x | MBa7x | ||||||
|---|---|---|---|---|---|---|---|---|
| I2C1 | 0x08 PMIC | 0x48 LM75A | 0x50 EEPROM | 0x68 RTC | 0x49 LM75A |
|||
| I2C2 | 0x18 Audiocodec | 0x2D HSIC HUB | 0x20 I2C GPIO expander | 0x6A Clock generator | ||||
TQMa7 REV.0200
| I2C bus | TQMa7x | MBa7x | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| I2C1 | 0x08 PMIC | 0x1e SE97BTP (tempsensor) | 0x50 EEPROM | 0x68 RTC | 0x56 SE97BTP (eeprom) | 0x36 SE97BTP | 0x49 LM75A |
|||||
| I2C2 | 0x18 Audiocodec | 0x2D HSIC HUB | 0x20 I2C GPIO expander | 0x6A Clock generator | ||||||||
| I2C bus | TQMa7x | |||||||
|---|---|---|---|---|---|---|---|---|
| I2C1 | 0x08 PMIC | 0x48 LM75A | 0x50 EEPROM | 0x68 RTC | 0x49 LM75A | 0x57 EEPROM | 0x68 RTC (optional DS1339) |
|
| I2C bus | MBa7x | ||||
|---|---|---|---|---|---|
| I2C2 | 0x18 Audiocodec | 0x2D HSIC HUB 0x19 Tempsensor | 0x20 PCA9554 | 0x6A Clock Generator |
|
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.