WORK IN PROGRESS
Embedded module TQMa8x - YOCTO Linux BSP documentation
BSP Overview
Please visit our Github for the latest updates and BSP releases.
BSP Version Matrix
| BSP Revision | meta-tq release | Yocto Project / Poky Release | Target machine1) | U-Boot | Linux Kernel |
|---|---|---|---|---|---|
| 0012 | sumo-tqma8x | 2.5.2 - Sumo | tqma8qm-mba8x.conf | v2018.03-rel_imx_4.14.98_2.2.0_ga | rel_imx_4.14.98_2.2.0 |
| 0016 | sumo-tqma8x | 2.5.2 - Sumo | tqma8qm-4gb-mba8x.conf tqma8qm-8gb-mba8x.conf | v2018.03-rel_imx_4.14.98_2.2.0_ga | rel_imx_4.14.98_2.2.0 |
| 0017 | sumo-tqma8x | 2.5.2 - Sumo | tqma8qm-4gb-mba8x.conf tqma8qm-8gb-mba8x.conf | v2018.03-rel_imx_4.14.98_2.2.0_ga | rel_imx_4.14.98_2.2.0 |
Bootloader
U-Boot
Supported features| Feature | BSP Revision | Remarks | |||||
|---|---|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | 0012 | 0016 | 0017 | |
| TQMa8x | i.MX8 | ENET0 | GbE | • | • | • | |
| TQMa8x | i.MX8 | ENET1 | GbE | • | • | • | |
| TQMa8x | i.MX8 | FlexSPI | QSPI NOR Flash | • | • | ||
| TQMa8X | i.MX8 | GPIO | • | • | |||
| TQMa8x | i.MX8 | I²C | Bus Access | • | • | ||
| TQMa8x | i.MX8 | UART | Debug Console | • | • | • | default console |
| TQMa8x | i.MX8 | uSDHC | eMMC / SD-Card | • | • | • | SD card / eMMC |
| TQMa8x | i.MX8 | USB2 | Host | • | • | ||
| TQMa8x | i.MX8 | USB3 | Host | • | • | ||
| TQMa8x | i.MX8 | Fuse | • | • | • | ||
Supported boot devices
Operating System
Operating System
Supported features| Feature | BSP Revision | Remarks | |||||
|---|---|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | 0012 | 0016 | 0017 | |
| TQMa8x | i.MX8 | ADC | • | ||||
| i.MX8 | ENET0 | GbE | • | • | • | ||
| i.MX8 | ENET1 | GbE | • | • | • | ||
| i.MX8 | FLEXCAN0 | CAN | • | ||||
| i.MX8 | FLEXCAN1 | CAN | • | ||||
| i.MX8 | FlexSPI | QSPI NOR Flash | • | ||||
| i.MX8 | FTM | PWM | • | ||||
| i.MX8 | GPIO | • | |||||
| i.MX8 | GPU | Hardware Acceleration | • | ||||
| i.MX8 | HDMI TX | Display Port | • | ||||
| i.MX8 | LDB | LVDS0 | • | Tested with Tianma TM070JVHG33 display | |||
| LVDS1 | • | Tested with Tianma TM070JVHG33 display | |||||
| i.MX8 | LPI2C | I2C1 | • | • | |||
| i.MX8 | LPSPI0 | SPI | • | • | |||
| i.MX8 | LPSPI1 | SPI | • | • | |||
| i.MX8 | LPSPI2 | SPI | • | • | |||
| i.MX8 | LPUART0 | Debug UART | • | MBa8x connector X28 | |||
| i.MX8 | LPUART1 | TTL | • | ||||
| i.MX8 | LPUART2 | TTL | • | ||||
| i.MX8 | PCIe | Host | • | ||||
| PCIe0 (Mini-PCIe) | • | MBa8x connector X45 | |||||
| PCIe1 (PCIe M.2) | • | MBa8x connector X47 | |||||
| i.MX8 | SAI | TLV320AIC3204 | • | ||||
| i.MX8 | SATA | Serial ATA 3.0 | • | MBa8x connector X48 | |||
| i.MX8 | USB2 | USB_OTG1 (HOST) | • | • | connected to USB hub on MBa8x | ||
| USB_OTG2 (OTG) | • | • | Bundled with USB3 | ||||
| i.MX8 | USB3 | • | MBa8x connector X29 | ||||
| i.MX8 | VPU | Hardware Acceleration | • | ||||
| MBa8x | TLV320AIC3204 | Audio Codec | Line Out/ Headphone Out | • | |||
| Line In | |||||||
| Microphone In | |||||||
| USB2517 | USB H1 | USB Connector | • | ||||
| USB H2 | USB Connector | • | |||||
| USB H3 | MIPI_DSI0 | • | |||||
| USB H4 | MIPI_DSI1 | • | |||||
| USB H5 | LVDS0 | • | |||||
| USB H6 | LVDS1 | • | |||||
| USB H7 | Mini-PCIe | • | • | ||||
Onboard I2C Devices
Onboard I2C devices
| I2C bus | TQMa8x | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| I2C1 | 0x1B Tempsensor | 0x33 EEPROM Protection Command | 0x51 RTC (Optional) | 0x53 EEPROM | 0x57 EEPROM | |||||
| PMIC_I2C | 0x08 PMIC#1 | 0x09 PMIC#2 | ||||||||
| I2C bus | MBa8x | ||||
|---|---|---|---|---|---|
| I2C1 | 0x18 Audio Codec | 0x34 EEPROM Protection Command | 0x1C Tempsensor | 0x54 EEPROM | 0x68 PCIe Clock generator |
Changelog
Changelog
Rev.0017
BSP
- update SCU firmware to version 1.2.10
- SCU add support for PMIC info
U-Boot
- load display port firmware during boot
- added support for SCU PMIC info
Linux
- added displayport audio support
- added audio support
- added FTM PWM support
- added ADC support
- added SATA support
- added GPIO button support incl. wakeup capabilities
- added LED support
- added Display Port support
- added LVDS support on both channels
- enable wakeup from GPIO button
- added GPIO LED and button support
Rev.0016
BSP
- added TQMa8QM 8GB variant
- systemd-machine-units: added tqma8qm support
- systemd-machine-units: reduce default can bitrate
- SCU Firmware added PCIe external clock
U-Boot
- added PCIe GPIO sideband pins
- added GPIO LED and button
- added USB support
- fix for flexspi write SR
- enable QSPI Boot
Linux
- added CAN support
- added PCIe support
- added USB support
- added SPI support
- added QSPI support (not completely functional)
- added LVDS support
Rev.0012
- initial BSP Release
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.