Supported Features
Please note that BSP Rev. 0100 is intended to be used on a MBLS102xA Rev. 02xx and higher.
When using BSP Rev. 0100 on a MBLS102xA Rev.01xx, please see How to Use BSP Rev.0100 on MBLS102xA Rev.01xx.
| Feature | BSP Revision | Remarks | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function(s) | Prerelease 7a3ec3d | 0004 | 0005 | 0100 | 0102 | 109 | |
| TQMLS102xA | LS102x | 2D-ACE | 24 Bit RGB | • | • | • | • | Pin header X17 on MBLS102xA | ||
| LS102x | 2D-ACE | SiI9022A | • | • | • | • | HDMI | |||
| LS102x | 2D-ACE | SN75LVDS83B | • | • | • | • | LVDS | |||
| LS102x | CAN1 | CAN 2.0 B | • | • | • | |||||
| LS102x | CAN2 | CAN 2.0 B | • | • | • | |||||
| LS102x | eSDHC | eMMC | • | • | • | • | • | • | mutually exclusive (cf user's manual) | |
| LS102x | eSDHC | SD card | • | • | • | • | • | • | ||
| LS102x | eTSEC0 | RGMII (10/100/1000 Mbit/s) | • | • | • | • | • | • | ||
| LS102x | eTSEC1 | SGMII (10/100/1000 Mbit/s) | • | • | • | MBLS102xA Rev. ≥ 0200 required | ||||
| LS102x | eTSEC2 | RGMII (10/100/1000 Mbit/s) | • | • | • | • | • | • | ||
| LS102x | GPIO | Digital I/O | • | • | • | • | • | • | ||
| LS102x | I2C1 | Bus access | • | • | • | • | ||||
| LS102x | I2C1 | EEPROM (M24C64) | • | • | • | • | EEPROM | |||
| LS102x | I2C1 | RTC (PCF85063) | • | • | • | • | RTC | |||
| LS102x | I2C1 | TEMP-Sensor (SA56004X) | • | • | • | • | TEMP-Sensor | |||
| LS102x | LPUART1 | TTL | ||||||||
| LS102x | PCIe | PCI Express™ Base Specification, Revision 3.0 | • | • | • | PCIe slot (X35) on MBLS102xA Mini-PCIe slot (X24) on MBLS102xA |
||||
| LS102x | QSPI | QSPI NOR Flash | • | • | • | • | ||||
| LS102x | SATA | Serial ATA Revision 3.0 | • | • | • | |||||
| LS102x | UART1 | TTL | • | • | • | • | • | • | ||
| LS102x | USB1 | USB 3.0 OTG | • | • | • | • | • | • | ||
| LS102x | USB2 | USB2517 on MBLS102xA | • | • | • | • | • | |||
| MBLS102xA | MBED/OpenSDA | miniUSB | Console | • | • | • | • | • | • | Console available on X43 xor X5 (LPUART) |
| SAI1 | TLV320AIC3204 | Audio Codec | ||||||||
| SiI9022A | HDMI | Ext. Monitor | • | • | MBLS102xA REV.0202 and TQMLS102xA ≥ REV.0203 required |
|||||
| SN75LVDS83B | LVDS | Ext. Display | • | • | • | • | X10 / X32 | |||
| SP3222E | UART1 | RS232 | • | • | • | • | • | • | ||
| SP491E | LPUART1 | RS485 | • | • | • | |||||
| STMPE811 | I2C | Touch | planned for future revision | |||||||
| USB2517 | USB2_H4 | Host | • | • | • | • | ||||
| USB2517 | USB2_H5 | Host | • | • | • | • | ||||
| USB2517 | USB2_H6 | Host | • | • | • | • | assembly option: Safenet HL Chip Sentinel |
|||
Onboard I2C devices
| I2C bus | TQMLS102xA | MBLS102xA | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| I2C1 | 0x04 PMIC | 0x11 PMC | 0x4C TEMP-Sensor | 0x4F ADM1069 | 0x51 RTC | 0x50 EEPROM 0x54 EEPROM | 0x18 Audio Codec | 0x20 I2C GPIO Expander | 0x21 I2C GPIO Expander | 0x22 I2C GPIO Expander | 0x3B HDMI | 0x41 Touch Controller | 0x60 PWM LED Dimmer | 0x68 Clock Generator |
| I2C2 | ||||||||||||||
| I2C3 | ||||||||||||||
Changelog
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.