Complete system images:
- uboot-sd.img : bootable image for TQMLS102xAx on MBLS102xA (usage on SD Card and eMMC)
The complete system images are intended for:
- development system initialisation
- deployment
Bootloader image:
- u-boot.bin
- u-boot-with-spl-pbl-mmcsd-2017.07.bin
- u-boot-with-spl-pbl-ecc-mmcsd-2017.07.bin
- u-boot-pbl.bin.bswap
- u-boot-pbl.bin.ecc.bswap
Linux images:
- linuximage : Kernel (zImage)
- ls1021a-tqmls1021a-mbls102xa.dtb : device tree blob for TQMLS102xA on MBLS102xA
Rootfs images:
- root.tgz : Root file system archive (for NFS etc.)
- root.ext2 : Root file system partition image (for system update)
- root.ubi : ubi partition for QSPI NOR
- root.ubifs : ubifs image for QSPI NOR
Firmware images:
- firmware.tgz : firmware image contains all devicetree blobs and linux kernel image
- firmware.img : firmware image archive (for firmware image creation)
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.