Overview
Due to licensing restrictions this BSP is available only on request
Bootloader
Bootloader
Supported features
| Feature | Remarks | |||
|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | |
| TQMLS102xA | LS102xA | ETSEC | RGMII / SGMII | For SGMII MBLS102xA Rev. ≥ 0200 required |
| TQMLS102xA | LS102xA | eSDHC | eMMC / SD-Card | Mutually exclusive (cf user's manual) |
| TQMLS102xA | LS102xA | UART1 | RS232 | Default console |
| TQMLS102xA | LS102xA | I2C0 | EEPROM / PMC (System Reset Request) | |
| TQMLS102xA | LS102xA | QSPI | QSPI NOR Flash | Up to 2 Devices |
| TQMLS102xA | LS102xA | SATA | SSD/HDD | |
| TQMLS102xA | LS102xA | USB XHCI | USB 3.0/2.0 | USB Storage Device |
Supported boot devices
| Boot device | supported |
|---|---|
| eMMC / SD boot | • |
| SPI NOR boot | • |
QNX Neutrino
QNX Neutrino 6.6.0
| TQ Product | Device | Interface | Function | Remarks |
|---|---|---|---|---|
| TQMLS102xA | Ls102x | CAN1 | CAN 2.0 B | |
| CAN2 | CAN 2.0 B | |||
| eTSEC0 | RGMII (10/100/1000 Mbit/s) | |||
| eTSEC1 | SGMII (10/100/1000 Mbit/s) | dhcp activated (telnet user:root , with on password) | ||
| eTSEC2 | RGMII (10/100/1000 Mbit/s) | |||
| I2C1 | Bus Access | |||
| QSPI | QSPI NOR Flash | |||
| SATA | Serial ATA Revision 3.0 | |||
| SPI1 | ||||
| uSDHC | SD(HC)-Card | |||
| Watchdog | ||||
| PCF85063 | I2C1 | RTC | ||
| MBLS102xA | SP3222E | UART1 | RS232 | Console UART |
| SP491E | LPUART1 | RS485 |
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.