QNX TQMa28
Release Notes
- UART 1
- UART 2
- USB 1
- USB 2
- ETH 1
- ETH 2
- SPI (SSP2)
- SD Card (SSP1)
- i2c1
- CAN 1
- CAN 2
- LC Display 800×480
- Touch
U-Boot Environment
setenv sd_qnx 'mmc init; mmcinfo 1; fatload mmc 1:1 0x40000000 bsp-tqm-tqma28.ifs; go 0x40000000'
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.