Devicetree laden TQMa6X
1. run mmcargs
2. run loadimage
3. run loadfdt
4. fdt addr ${fdt_addr}
Devicetree Update TFTP TQMA6x
TFTP Programm auf Hostrechner starten, in das TFTP Verzeichniss mit den Dateien die auf das Modul kopiert werden sollen wechseln dann.
1. setenv auto load no
2. dhcp
3. setenv fdt <devicetreename.dtb>
4. run update_fdt
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.