Stand BSP Rev.0115
- Update des Boot EEPROM nicht über das MFG Tool möglich !
../eeprom Device File im sysfs fehlt: TQMa28 und TQMa28L Updater-Image hatten EEPROM Treiber nicht aktiviert
(aktualisierte Images landen im nächsten ARM-BSP)
- TQMa28 U-Boot v2015.07 muxt I2C0 Pins nicht
Boot von I2C0-EEPROM = kein Problem (i.MX28 ROM-Loader muxt Pins),
wenn Boot von USB/SD = kein Zugriff auf I2C0 möglich
- Beim TQMa28L U-Boot v2015.07 sind I2C0 Pins nicht gemuxt, weil kein Boot-EEPROM auf der Hardware vorgesehen ist. Dies muss Kunde bei der Boardanpassung (Pinmuxing / Devicetree) berücksichtigen
- Der MX28 bootet im Normalfall encrypted Images, die mit einem Zero-Key verschlüsselt sind.
aus Sicherheitsgründen bootet der MX28 nur encrypted images ohne weiteres Zutun.
- Unencrypted images können erst nach Brennen der Fuse ENABLE_UNENCRYPTED_BOOT(HW_OCOTP_ROM0:4) gebootet werden.
- Die Images für das Boot EEPROM können aus dem MFG Profil des TQ-ARM BSP entnommen werden.
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.