TQMT1040 SerDes Configuration (0x66)
| S3 | S9 | |||||||
 |  |
|||||||
|---|---|---|---|---|---|---|---|---|
| DIP | 1 | 2 | 3 | 4 | 1 | 2 | ||
| ON | • | |||||||
| OFF | • | • | • | • | • | |||
TQMT1040
| Ethernet interface assigment | |||
|---|---|---|---|
| X30 | X37 | ||
| * | * | fm1-mac3 | not used |
| * | * | fm1-mac4 | not used |
* Connected to Ethernet switch on STKT104x (with RCW TQMT1040_SERDES66 and DIP switch configuration for SERDES66)
TQMT1042 SerDes Configuration (0x88)
| S3 | S9 | |||||||
 |  |
|||||||
|---|---|---|---|---|---|---|---|---|
| DIP | 1 | 2 | 3 | 4 | 1 | 2 | ||
| ON | • | |||||||
| OFF | • | • | • | • | • | |||
TQMT1042
| Ethernet interface assigment | ||||
|---|---|---|---|---|
| X30 | X37 | |||
| U-Boot | * | FM1@DTSEC1 | FM1@DTSEC4 | * |
| FM1@DTSEC3 | * | FM1@DTSEC5 | FM1@DTSEC2 | |
| Linux | * | fm1-mac0 | fm1-mac3 | * |
| fm1-mac2 | * | fm1-mac4 | fmc-mac1 | |
* Connected to Ethernet switch on STKT104x (with RCW TQMT1042_SERDES88 and DIP switch configuration for SERDES88)
SerDes mulitplexing: Available interfaces
| CPU | [SRDS_PRTCL_S1_RCW] | 10 GbE (SFP+) | SGMII | QSGMII | Aurora | PCIe | Mini-PCIe | SATA | RGMII MACs |
|---|---|---|---|---|---|---|---|---|---|
| T2081 | 0x70 | 1 | 3 | - | - | - | - | - | 2 |
| 0xF2 | - | 3 | - | - | 1 | 2 | - | 2 | |
| T1040 | 0x66 | - | 1 | 1 | - | 1 | 2 | 1 | 1 |
| 0x8E | - | 3 | - | 1 | 1 | - | 1 | 2 | |
| T1042 | 0x86 | - | 3 | - | - | 1 | 2 | 1 | 2 |
| 0x88 | - | 3 | - | - | 1 | 1 | 2 | 2 | |
| 0x8E | - | 3 | - | 1 | 1 | - | 1 | 2 |
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.