RS232
Configuring RS232
1. Set up Host and Target serial port (e.g. STKa7x)
- connect STKa7x and Host PC via null modem cable
- run terminal emulator on the Host PC
2. Configure serial port as follows:
| Baudrate | Data bits | Parity | Stop bits | Handshake |
|---|---|---|---|---|
| 115200 | 8 | none | 1 | XON/XOFF |
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.