Cooling kit for TQM1042/STK1042

Parts

(279049.0100) 1 x Heat spreader (164107.0100) 1 x Gap filler/pad (279413.0100) 1 x Heat sink (264233.0100) 4 x Screw M3x14 Torx T10 (279324.0100) 4 x Screw M3x16 Hex Key 2 mm (279327.0100) 4 x Spring
+ Thermal paste (no pic yet)

Optional

(186322.0100) 1 x Fan (231584.0100) 1 x Connector (263912.0100) 4 x Screw M3x40 Torx T10

Unused

Bracket

Assembly

  1. Remove both protective films and place soft-silicone film on heat spreader
  2. Screw heat sink onto heat spreader
  3. Optional: Mount fan
    1. Attach connector to fan
    2. Mount fan on heatsink
  4. Apply thermal paste on CPU die
  5. Place cooling kit on top of CPU module
  6. Put springs into heatsink
  7. Screw cooling kit to carrier board
    1. Evenly tighten all four screws carefully
    2. Loosen each screw by approx. ¼ to ½ turn

Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.