Boot from external BIOS
MB-COME10-1 and MB-COME6-1
| X23 | |||
|---|---|---|---|
| SM Bus CLK | 1 | 2 | I2C Bus CLK |
| SM Bus DAT | 3 | 4 | I2C Bus DAT |
| SM Bus Alert | 5 | 6 | 3V3 |
| BIOS_DIS0# | 7 | 8 | GND |
| BIOS_DIS1# | 9 | 10 | GND |
If there is no Jumper present on the BIOS_DIS1# or BOOT_SEL2_1V8# signal the module will load its BIOS from the internal SPI flash.
If there is a Jumper on the BIOS_DIS1# or BOOT_SEL2_1V8# signal (between signal and GND) the module loads its BIOS from the flash in the SPI socket of the carrier board.
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.