Embedded module TQMa62xx - YOCTO Linux BSP documentation
MIPI-CSI
Hardware Setup
Instructions for setting up and connecting the camera can be found in the Camera QuickStartGuide:
MIPI-CSI Quick start guide
Software Setup
The following software example displays the live image of the camera on the LVDS display.
To view the live image, an LVDS display must be connected.
Camera imx327 (color)
1. Start the Kit and wait for “Select the boot mode”
2. Select the appropriate Devicetree for the use of the Camera:
Select 4 for IMX327 only, 6 for LVDS display and IMX327 and hit enter to set the appropriate Devicetree for the use of the Camera.
3. Hit enter to boot the Kit with the selected device tree.
4. When linux is started, login and configure the cam:
media-ctl -V '"30102000.ticsi2rx":0[fmt:SRGGB10/1280x720]'
media-ctl -V '"cdns_csi2rx.30101000.csi-bridge":0[fmt:SRGGB10/1280x720]'
media-ctl -V '"imx327 1-001a":0[fmt:SRGGB10/1280x720 field:none]'
5. run the following command to see the camera output on the LVDS display:
gst-launch-1.0 v4l2src device=/dev/video0 ! video/x-bayer,format=rggb,bpp=10,width=1280,height=720 ! \ bayer2rgbneon show-fps=t reduce-bpp=t ! video/x-raw,format=RGBx ! autovideoconvert ! waylandsink
For more Information please visit our GitHub: https://github.com/tq-systems/meta-tq/blob/kirkstone.TQMa62xx.BSP.SW.0001/meta-tq/doc/README.TQMa62xx.md
- Last modified: 2024/02/13 13:23