This is an old revision of the document!
Embedded module TQMa7x - QNX Neutrino BSP documentation
BSP Overview
Due to licensing restrictions this BSP is available only on request
Bootloader
U-Boot 2016.03 (NXP imx-rel_imx_4.1.15_2.0.0_ga)
Supported features
| Feature | QNX Revision | Remarks | |||
|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | 6.6.0 | |
| TQMa7x | i.MX7 | Ethernet | 2x RGMII (10/100/1000 Mbit/s) | • | |
| TQMa7x | i.MX7 | Fuses | • | ||
| TQMa7x | i.MX7 | GPIO | • | custom config on request | |
| TQMa7x | i.MX7 | I²C | EEPROM, Temperature Sensors, RTC | • | |
| TQMa7x | i.MX7 | qSPI | QSPI SPI NOR Flash | • | |
| TQMa7x | i.MX7 | UART6 | RS232 | • | default console |
| TQMa7x | i.MX7 | USB | USB Storage Device | • | |
| TQMa7x | i.MX7 | uSDHC | eMMC / SD-Card | • | SD card / eMMC |
Supported boot devices
| Boot device | supported |
|---|---|
| eMMC | • |
| SD Card | • |
| QSPI NOR |
Operating System
Supported Features
| Feature | QNX Version | Remarks | |||
|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | 6.6.0 | |
| TQMa7x | i.MX7 | eCSPI1 | • | ||
| i.MX7 | eCSPI2 | • | |||
| i.MX7 | ENET1 | RGMII (10/100/1000 Mbit/s) | • | incompatible with MBa7x Rev.010x | |
| i.MX7 | FLEXCAN1 | CAN 2.0B | • | ||
| i.MX7 | FLEXCAN2 | CAN 2.0B | • | ||
| i.MX7 | I2C1 | I2C devices | • | see supported onboard I2C devices | |
| i.MX7 | I2C2 | I2C devices | • | see supported onboard I2C devices | |
| i.MX7 | LCD1 | Parallel LCD | LVDS and LCD1 are mutually exclusive, special devicetree needed comming soon with QNX7 |
||
| i.MX7 | PCIe | Device Discoery | on request | ||
| i.MX7 | QSPI | Bus access Memory access | on request | ||
| i.MX7 | UART3 | TTL | • | not available on MBa7x | |
| i.MX7 | UART4 | TTL | • | not available on MBa7x | |
| i.MX7 | UART5 | TTL | • | not available on MBa7x | |
| i.MX7 | UART6 | RS232 | • | Default Console | |
| i.MX7 | USB_Host | USB4604 | • | ||
| i.MX7 | USB_OTG1 | Host | • | ||
| i.MX7 | USB_OTG1 | OTG | • | ||
| i.MX7 | uSDHC | uSDHC1 SD Card uSDHC3 eMMC | • | HS200 / HS300 Mode for uSDHC3 HS MODE for SD Card on uSDHC1 needs switchable supply voltage, not available on MBA7x |
|
| MBa7x | USB4604 | USB1 | Host | • | |
| USB4604 | USB2 | Host | • | ||
Onboard I2C devices
| I2C bus | TQMa7x | |||||||
|---|---|---|---|---|---|---|---|---|
| I2C1 | 0x08 PMIC | 0x48 LM75A | 0x50 EEPROM | 0x68 RTC | 0x49 LM75A | 0x57 EEPROM | 0x68 RTC (optional DS1339) |
|
| I2C bus | MBa7x | ||||
|---|---|---|---|---|---|
| I2C2 | 0x18 Audiocodec | 0x2D HSIC HUB 0x19 Tempsensor | 0x20 PCA9554 | 0x6A Clock Generator |
|