Bootloader
Supported Features
| Feature | BSP Revision | Remarks | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | 100 | 101 | 102 | 106 | 109 | 115 | 117 | 119 | |
| TQMa28 | i.MX28 | CPU | • | • | • | • | • | • | • | • | i.MX287, i.MX283 | |
| EMI | DDR2 SDRAM | • | • | • | • | • | • | • | • | |||
| SSP0 | eMMC | • | • | • | • | • | • | • | • | boot device | ||
| SSP1 | SD card | • | • | • | • | • | • | • | • | boot device | ||
| I2C0 | Bus access | • | • | • | • | • | • | • | • | intended for customer use | ||
| I2C1 | Bus access | • | • | • | • | • | • | • | • | |||
| I2C1 | LM73 | • | • | • | • | • | • | • | • | |||
| M24C64 | • | • | • | • | • | • | • | • | ||||
| OCOTP | • | • | • | • | • | |||||||
| AUART3 | RS232 | • | • | • | • | • | • | • | • | RX/TX/RTS/CTS, TTL available on X14 | ||
| ENET-MAC0 | 10 Mbps and 100 Mbps Ethernet/IEEE 802.3 | • | • | • | • | • | • | • | • | |||
| ENET-MAC1 | 10 Mbps and 100 Mbps Ethernet/IEEE 802.3 | • | • | • | • | • | • | • | • | |||
| LM73 | I2C | Temperature sensor | • | • | • | • | • | • | • | • | ||
| M24C64 | I2C | EEPROM | • | • | • | • | • | • | • | • | ||
| MBa28 | LM73 | Temperature sensor | • | • | • | • | • | • | • | • | ||
Above table primarily applies to platform tqma28, please see changelog in tab “Bootloader” for details on differences to platform tqma28-fsl
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.