BSP Overview
BSP Version Matrix
Supported boot devices
| Boot device | supported |
|---|---|
| SPI NOR Flash | • |
| eMMC | |
| SD card | • |
Bootloader
Supported Features
| Feature | BSP Revision | Remarks | |||
|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | 0100 | |
| TQMT104x | T104x | eSDHC | SD Card | • | Mutually exclusive |
| T104x | eMMC | ||||
| T104x | I2C1 | I2C devices | • | cf. Onboard I2C devices | |
| T104x | I2C2 | I2C devices | • | ||
| T104x | I2C3 | Bus access | • | ||
| T104x | I2C4 | Bus access | • | mutliplexed with DIU | |
| T104x | IFC | parallel NOR Flash | • | ||
| T104x | MAC[1-3] | SGMII | • | double check STKT104x DIP switch configuration | |
| T104x | MAC[4-5] | RGMII | • | ||
| T104x | UART1 | RS232 | • | Default console | |
| T104x | UART2 | RS232 | • | ||
| T104x | USB1 | USB2514 | • | ||
| T104x | USB2 | Host | • | ||
| STKT104x | USB2514 | USB1 | Host | • | X23A |
| USB2 | Host | • | X23B | ||
| USB3 | Mini-PCIe | X19 | |||
| USB4 | LVDS CMD | X31 | |||
Operating System
Supported Features
| Feature | BSP Revision | Remarks | |||
|---|---|---|---|---|---|
| TQ Product | Chip | Interface | Function | 0100 | |
| TQMT104x | T104x | DIU | LVDS | • | 24-bit available via X7 on STKT104x |
| T104x | ENET1 | RGMII | • | ||
| T104x | ENET2 | RGMII | • | ||
| T104x | eSDHC | SD Card | • | Mutually exclusive | |
| T104x | eMMC | ||||
| T104x | eSPI | Bus access | • | No device on STKT104x | |
| T104x | I2C1 | I2C devices | • | cf. Onboard I2C devices | |
| T104x | I2C2 | I2C devices | • | ||
| T104x | I2C3 | Bus access | • | ||
| T104x | I2C4 | Bus access | • | mutliplexed with DIU | |
| T104x | IFC | parallel NOR Flash | • | ||
| T104x | SerDes Lane 0/A | T2081 only | |||
| T104x | SerDes Lane 1/B | SGMII | • | ||
| T104x | SerDes Lane 2/C | QSGMII | • | TQMT1040 only | |
| T104x | SGMII | • | |||
| T104x | SerDes Lane 3/D | SGMII | • | ||
| T104x | SerDes Lane 4/E | Aurora | |||
| T104x | miniPCIe | • | Mutually exclusive, see STKT104x DIP switch configuration Tested with MPCIe Intel NIC |
||
| T104x | SerDes Lane 5/F | PCIe | • | Tested with PCIe Intel NIC | |
| T104x | SerDes Lane 6/G | SATA | • | Mutually exclusive, see STKT104x DIP switch configuration | |
| T104x | SGMII | • | Mutually exclusive, see STKT104x DIP switch configuration | ||
| T104x | miniPCIe | • | Tested with MPCIe Intel NIC | ||
| T104x | SerDes Lane H | SATA | • | ||
| T104x | UART1 | RS232 | • | Default console | |
| T104x | UART2 | RS232 | • | ||
| T104x | USB1 | USB2514 | • | ||
| T104x | USB2 | Host | • | ||
| STKT104x | DS90C387R | DIU | LVDS Transmitter | • | Tested with Chimei G104X1 |
| PCA9554 | GPIO | Digital Output | • | 2 x LED (V74 via IO6 & V75 via IO7) | |
| PCA9554 | GPIO | Digital Output | • | 1 x LED (V73 via IO7) | |
| PCA9554 | GPIO | Digital Input | • | 3 x Button (S6, S7, S8) | |
| PCS9530D | PWM | Backlight Control | • | ||
| STMPE811 | 4-wire | Resistive Touchscreen Controller | |||
| USB2514 | USB1 | Host | • | X23A | |
| USB2 | Host | • | X23B | ||
| USB3 | Mini-PCIe | X19 | |||
| USB4 | LVDS CMD | X31 | |||
Onboard I2C devices
| I2C bus | TQMT104x | |||||||
|---|---|---|---|---|---|---|---|---|
| I2C1 | 0x11 System Controller | 0x18 Tempsensor | 0x24 Tempsensor | 0x44 Supervisor | 0x50 EEPROM | 0x51 RTC | 0x57 EEPROM |
|
| I2C bus | STKT104x | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| I2C2 | 0x20 PCA9554 | 0x21 PCA9554 | 0x23 PCA9554 | 0x30 PCA9530D | 0x38 DS90C387 | 0x42 PCA9554 | 0x68 Clock Generator | 0x82 STMPE811 | 0x6C Clock Generator |
|
Disclaimer
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.
TQ-Systems GmbH provides the Board Support Packages (BSP) free of charge. The software included in the shipment has been configured individually for the starter kits. The software is only intended to evaluate the module. The use of the Board Support Packages (BSP) is only allowed within the scope of functionality described by TQ-Systems GmbH. TQ-Systems GmbH does not accept any liability for all further changes of the Board Support Package and for any damage resulting from its use.